ACETYL ACETONE AR FOR SYNTHESIS Laboratory Chemical MSDS

Product Name RXSOL-60-6512-001
Product Type ACETYL ACETONE AR FOR SYNTHESIS
Revised date 27-04-2019

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat Barka

Phone +91 22 27815541 / 42
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com

Substance / Preparation : Acetyl Acetone
CAS No :123-54-6
Substance.
Substance name Contents CAS No
Acetyl Acetone: 100 % 123-54-6
Contains no other components or impurities which will influence the classification of the
product.
3.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Health hazards : Acute toxicity, Oral - Category 4 - Warning (CLP : Acute Tox. 4)
H302
Physical hazards : Flammable liquids - Category 3 - Warning (CLP : Flam. Liq. 3) H226
3.2. Label elements
Labelling EC 67/548 or EC 1999/45
Symbol(s) : Xn : Harmful
Highly flammable
 
R Phrase(s) : R10 : Flammable.
R22 : Harmful if swallowed.
S Phrase(s) : S2 : Keep out of the reach of children.
S21 : When using do not smoke.
S23 : Do not breathe the gas, fumes, vapours, spray.
S24/25 : Avoid contact with skin and eyes.
Labelling Regulation EC 1272/2008 (CLP)
Hazard pictograms
Signal words : Warning
Hazard statements : H226 : Flammable liquid and vapour.
H302 : Harmful if swallowed.
Precautionary statements
• General : P102: Keep out of reach of children.
P103: Read label before use.
P101: If medical advice is needed, have product container or label at hand.
• Prevention : P240: Ground/bond container and receiving equipment.
P241: Use explosion-proof electrical, ventilating, lighting, …, equipment.
P210: Keep away from heat, sparks, open flames or hot surfaces. – No smoking.
P280: Wear protective gloves, protective clothing, eye protection, face protection.
P233: Keep container tightly closed.
P264: Wash thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
• Response : P301+P312: IF SWALLOWED : Call a POISON CENTER or doctor if you
feel unwell.
P303+P361+P353: IF ON SKIN (or hair) : Remove immediately all contaminated
clothing. Rinse skin with water/shower.
P370+P378: In case of fire: Use for extinction.
• Storage : P403+P235: Store in well-ventilated place. Keep cool.
• Disposal considerations : P501: Dispose of this material and its container to hazardous
or special waste collection point, in accordance with local, regional, national and/or
international regulation.
3.3. Other hazards
Other hazards : The substance does not fulfil the criteria to be identified as PBT
substance or vPvB substance according to Annex XIII of Regulation REACH
4.1. Description of first aid measures
Inhalation : Assure fresh air breathing. Allow the victim to rest.
Skin contact : Wash with plenty of soap and water. Remove/Take off immediately all
contaminated clothing.
Eye contact : Rinse immediately with plenty of water. Obtain medical attention if pain,
blinking or redness persist.
Ingestion : Obtain emergency medical attention. Rinse mouth. Call a POISON CENTER
or doctor if you feel unwell. Do NOT induce vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Swallowing a small quantity of this material will result in
serious health hazard.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person. If you
feel unwell, seek medical advice (show the label where possible).
 

5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will be
present.
5.3. Advice for fire-fighters
Protection against fire : Do not enter fire area without proper protective equipment,
including respiratory protection.
Special procedures : Exercise caution when fighting any chemical fire. Avoid (reject)
fire-fighting water to enter environment.
6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection.
Ventilate area.
Technical measures : Use special care to avoid static electric charges.
Special precautions : Remove ignition sources. No naked lights. No smoking.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precEnvironmental precautions : Prevent entry to sewers and public waters. Notify
authorities if product enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : Soak up spills with inert solids, such as clay or diatomaceous earth
as soon as possible. Store away from other materials. Collect spillage.
6.4. Reference to other sections
See section 8. Exposure controls/personal protectionautions
 
7.1. Precautions for safe handling
Handling : Handle empty containers with care because residual vapours are flammable.
Wash thoroughly after handling. Do not eat, drink or smoke when using this product.
Take precautionary measures against static discharge.
Technical protective measures : Provide good ventilation in process area to prevent
formation of vapour. Proper grounding procedures to avoid static electricity should be
followed. Use only non-sparking tools. Use explosion-proof electrical, ventilating,
lighting, …, equipment.
Special precautions : No naked lights. No smoking.
7.2. Conditions for safe storage, including any incompatibilities
Storage : Keep only in the original container in a cool, well ventilated place. Keep in
fireproof place. Keep container tightly closed. Ground/bond container and receiving
equipment.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
Heat sources.
7.3. Specific end use(s)
Specific end use(s) : None.

8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : Wear approved mask.
• Hand protection : Wear protective gloves.
• Eye protection : Chemical goggles or safety glasses.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits : No data available
 
9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Liquid.
Odour threshold : No data available.
pH value : No data available.
Melting point [°C] : -230C
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : 340 °C
Flammability (solid, gas) : Flammable liquid and vapour.
Flammable.
Flash point [°C] : 34 °C
Boiling point [°C] : 139 - 1410C
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : 0,75
Vapour pressure [20°C] : N/A
Vapour pressure mm/Hg : 6 mm Hg
Vapour density : 3,5
Density [g/cm3] : 0,973
Relative density, gas (air=1) : 3,5
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : Complete.
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : N/A
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : 11,60%
Explosion limits - lower [%] : 2,40%
Oxidising properties : No data available.
10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures. Open flame.
Overheating. Heat. Sparks.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
May release flammable gases
 
11.1. Information on toxicological effects
Acute toxicity
• Inhalation : Based on available data, the classification criteria are not met.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Harmful if swallowed.
Corrosion : Based on available data, the classification criteria are not met.
Irritation : Based on available data, the classification criteria are not met.
Sensitization : Based on available data, the classification criteria are not met.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Based on available data, the classification criteria are not met.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Based on available data, the classification criteria are not
met.
Aspiration hazard : Based
12.1. Toxicity
Toxicity information : Not established.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be
identified as PBT substance or vPvB substance according to Annex XIII of Regulation
REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment.

13.1. Waste treatment methods
General : Avoid release to the environment. Dispose in a safe manner in accordance with local/national regulations. Dispose of this material and its container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. Special precautions : Handle empty containers with care because residual vapours are flammable. 

14.1. Land transport (ADR-RID)
Proper shipping name : Acetyl Acetone
UN N° : 2310
H.I. nr : 36
ADR - Class : 3
Labelling - Transport : 3 : Flammable liquid. 6.1 : Toxic substances.
ADR - Classification code : FT1
 
 
15.1. Safety, health and environmental regulations/legislation specific for the
substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to
restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject
to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.
Abbreviations and acronyms : PBT: persistent, bioaccumulative and toxic.
vPvB: very persistent and very bioaccumulative
Sources of key data used : REGULATION (EC) No 1272/2008 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification,
labelling and packaging of substances and mixtures, amending and repealing Directives
67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006
 
 
RX MARINE INTERNATIONAL is the supplier of ACETYL ACETONE AR.in Mumbai, Gandhidham, Kolkata, Visakhapatnam, Chennai & Fujairah, Oman & Muscat.
For any queries contact us:
 
 

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : rxmarinechemical@gmail.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarinechemical@gmail.com ( This mail is for supplier only )