Hydro Testing Corrosion Inhibitor

Non-Flammable

Safe Plant Handling
Low Odor
Provides corrosion protection in the liquid and the vapor phase
When used in hydrostatic testing the product provides protection in liquids below, above and at the liquid levels. Protection of recessed and hard to reach areas. Complicated valves and the interior surfaces of piping and equipment, which are often difficult or impossible to reach, are protected with true Vapor Corrosion Inhibitor action. Can be applied for hydrotest solution, metalworking fluids, coatings, adhesives and water treatment formulations.

Hydro Testing Corrosion Inhibitor RXSOL 4000 is a cocktail of water soluble chemicals designed to protect pipelines from corrosion during hydrostatic testing and mothball operations. Hydro Testing Corrosion Inhibitor RXSOL 4000 incorporates oxygen scavenger to rapidly remove oxygen, biocide to prevent Microbial Influenced Corrosion (MIC), together with a film forming corrosion inhibitor to combat acid (low pH) corrosion. Hydro Testing Corrosion Inhibitor RXSOL 4000 represents a single stage treatment chemical treatment, for hydrotest and mothball operations. Hydro Testing Corrosion Inhibitor RXSOL 4000 is a completely soluble product in fresh water, seawater and in most oilfield brine solutions. It is, therefore, suitable for use in water injection systems (which have no mechanical deaeration), hydrotest and mothball operations, and as a packer fluid. Hydro Testing Corrosion Inhibitor RXSOL 4000 has been used in a large number of major projects in the North Sea, Latin America and South East Asia.

Risk of serious damage to eyes. In case of contact with eyes, rinse immediately with plenty of water & seek medical advice.  Wear suitable gloves and eye / face protection

Pipeline corrosion inhibitor manufacturer and supplier. Hydro Testing Corrosion Inhibitor RXSOL 4000 provide complete protection against rust and scale.

Chemical for conditioning of hydro test water i.e. blend of corrosion inhibitor, one Oxygen scavenger, one scale inhibitor & one biocide

The major factor which contributes to the corrosion in hydro-static test water is the dissolved oxygen and dissolved solids do not have much impact on the corrosion rate except the chloride content. The presumptions like not using the corrosion inhibitor if the water is not with high mineral content could beM disastrous as in fact any corrosion process, even a very mild one, will be accompanied by the set up of galvanic cells and formation of corrosion products deposits. Such environment makes the conditions ideal for the corrosion process to continue at accelerated rate once the process fluid will be run through the line.

Hydro Testing Corrosion Inhibitor RXSOL 4000 is Hydro-testing corrosion protection for Pipeline, Tank.  RXSOL 4000 Chemical for conditioning of hydro test water i.e. blend of corrosion inhibitor, one Oxygen scavenger, one scale inhibitor & one biocide manufacturer exporter and supplier Mumbai, Surat, Gandhidham, Chennai, Ennore, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Sharjah, Ajman, Abudhabi, Dubai UAE Middle East, Muscat Oman Sohar

Effect of Micro – Organisms:

All water used for Hydro-testing generally contains iron bacteria and sulphate reducing bacteria. The iron bacteria attack to the pipe wall mostly at 6 o’clock location and produces tubercle of iron oxide by metabolic action. Below the tubercles, sulphate reducing bacteria grows and generates H2S from sulphate of water. The H2S goes on reacting with iron forming Fe2S. This is combined with auto catalytic formation of HCI under tubercle and lead to deep pitting and perforation of the pipe wall. The mechanism is more pronounced under stagnant condition and is relevant of Hydrostatic testing.


#HydroTestingINHIBITOR_UAE