Metal Rust Shine – For effective cleaning

Cleaning different type of equipment needs different cleansing and degreasing agents. Metal Rust Shine is a liquid surfactant based compound which is used for effectively cleaning different surfaces for rust and also as a surface brightener. This solution is a heavy duty cleaning agent which is a blend of powerful surfactants and organic compounds which contain inhibiting, solubilizing and rust penetrating properties. It not only cleans rust but also prevents rusting further.

Metal Rust Shine can be used effectively to clean steel, brass, copper, wood, ceramic and aluminium surfaces whether they are painted or not. It is a highly concentrated solution containing up to 73% active matter. It can be used safely for tank clang, in marine industry and many other rust effected places.

For cleaning steel surfaces, always wash and clean the surface of any grease, dirt and old paint. Once the surface is clean and wet, Metal Rust Shine should be applied sufficiently to cover the whole surface and left to do the work.

For cleaning of tough stains on wooden and painted rust effective surfaces, Metal Rust Shine should be used in concentrated form. The stain needs to be soaked in the solution for at least 20-30mins depending upon the severity of the stain. Once done, the surface can be washed off with clean water. Second treatment nay be required to remove stubborn stains.

For cleaning for stainless steel surfaces affected by rust or just as a surface brightener, Metal Rust Shine can be used in a spray form. The solution needs to be sprayed once diluted with water and left for 15-20mins. The surface can be washed with fresh water to reveal rust free bright surface.

Metal Rust Shine can be used in circulation method too. When fixed machines are to be cleaned, the solution needs to be heated up to 50% after dilution with water. The solution is then circulated through Butterworth machines for at least 30mins. After the time duration, the tank or the machine needs to be washed with hot water for at least 2 hours to ensure removal of all traces of the cleansing solution. Once done, wash the surface with clean fresh water.

The Properties of Metal Rust Shine are that it is non-flammable in nature. It treats rusted surface and prevents further rusting. It effectively serves as surface brightener. It removes corrosion from all surfaces. It is not known to affect rubber and plastic compounds. It does not harm painted surfaces. It can be used in enclosed spaces since it is odourless. It is suitable for cleaning in both high-low pressure as well as manual cleaning. It can be effectively used in cleaning Marine fats and salts for ships, tanks, buses, trains etc. When cleaning brass, copper and aluminium materials, care should be taken to flush with plenty fresh water after cleaning. Moreover, it is economical and cost effective.

Precaution

Proper cleaning gear should be worn before using Metal Rust Shine. PVC gloves face mask for eyes and mouth and chemical resistant clothing needs to be worn lest contact occurs.  In case of contact with eyes or skin wash, immediately with plenty of fresh water and contact your physician.

RX Marine is a trusted supplier of Metal Rust Shine solution which is apt for cleaning rust affected surfaces and also serves as surface brightener. These are available in different quantities to suite the consumer’s need. These are concentrated formulations meant for effective cleaning purpose. RX Marine urges all its consumers to read the instructions carefully before using the solution.