Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Mud Drilling Detergent RXSOL ORG DD

Product Description | Product Application | Product Notes| Product DOSE
It is designed to reduce the surface tension of all water-base mud systems and reduce the sticking tendency of water-sensitive shale cuttings.
Code:
RXSOL-81-8139-210
Other Equivalent Brand

MUD DETERGENT, Drilling Fluid, Drilling Mud 210 Ltr

Short Description:
It is designed to reduce the surface tension of all water-base mud systems and reduce the sticking tendency of water-sensitive shale cuttings.
Generic Name:
DRILLING DETERGENT
Active Matter:
88 - 90
Add to Compare
|
Compare Now
Video not available
Mud Drilling Detergent RXSOL ORG DD
Application:
RXSOL ORG DD has application in all drilling areas and can be used in virtually any water-base drilling fluid. It is used primarily in upper-hole drilling to minimize bit and Bottom-Hole Assembly (BHA [+] Read More...
Using Procedure:
Normal treatments range from 0.1 to 0.2 lb/bbl (0.3 to 0.6 kg/m3) and provide satisfactory performance under most conditions. In severegumbo shale areas, 4 to 6 lb/bbl (11.4 to 17 kg/m3) concentrations of RX [+] Read More...
Note:
Advantages : Minimizes bit and BHA balling Reduces the surface tension of the liquid phase, helping to drop sand and remove drill solids Improves water-wetting action on all solids and reduces [+] Read More...
Technical Specifications:

Typical Physical Properties:


Physical appearance  :Light Pale Brown liquid
Specific gravity           :1.01-1.02
pH (1% solution)        :8.2
Solubility in water       :100%
Freezing point            :32°F (0°C)

Remarks:
DRILLING DETERGENT
General Purpose of Use, to use in drilling mud to prevent drilling with 
clays
Specification: 
1. Physical properties: The material, as received, should be soapy liquid, miscible with water. It should be free from visible impurities 
and any other suspended matter. 
2. Density at 25 DegC, gm/ml: 1.00 - 1.10, 
3. Surface Tension of 0.25 %: 35.00(v/v) solution of the sample in distilled water at 25 Deg.C, dynes/cm., maximum. 
4. PH of 1 % (v/v) solution: 7.5 - 10.5 of the sample in distilled water. 

5. Emulsion Stability Test: To 485 ml of distilled water, add 15 ml of HSD oil slowly while stirring in a multimixer and then add to it 1 ml. of the sample. Stir further for 15 minutes in the multimixer for formation of emulsion. Transfer the contents to 500 ml. measuring cylinder and observe phase separation of the mixture which should  be as follows:
(i) Immediate separation of HSD oil should be nil.
(ii) Separation of HSD oil after 24 hrs. at room temperature should not be more than 5 ml.

6. Mud Lubricity Coefficient: Prepare a 10-cp bentonite suspension by dilution of prehydrated bentonite suspension (OIL approved bentonite) and treat it with 0.5 %(v/v) of the sample and stir it for 15 minutes in a multimixer. Determine lubricity coefficient of the suspension in a lubricity tester. Lubricity co-efficient should not be more than 0.20 

7. Foaming tendency test: Prepare 0.10% (v/v) solution of the sample in distilled water Stir the solution for 10 minutes in a multimixer. Transfer the content immediately to a measuring cylinder. Allow it to stand for 15 minutes and then measure the total volume of content along with foam. Calculate percent increase in volume due to foaming. Increase in volume should not be more than 5.00% 

Mud Drilling Detergent RXSOL ORG DD manufacturer and supplier in India UAE Middle East Oman, Dubai, Sharjah, Abudhabi, Ajman, Muscat Barka Sohar Oman, Mumbai, Kolkata, Kakinada, Chennai, Visakhapatnam, Gandhidham Surat, Hazira, Sudan, Yemen

Mud Drilling Detergent RXSOL ORG DD
:
Packing Size:
210.00 Ltr.
Available Packing Size:
Drilling Detergent material is available in leak-proof HDPE carboys with leak-tight stopper and screw caps. pack of 25 Ltrs, 50, 210 Ltrs, and Also available in 1000 Ltr IBC TANK
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : rxmarinechemical@gmail.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarinechemical@gmail.com ( This mail is for supplier only )