Pickling Dip Liquid

MATERIALS AND CONDITIONS TO AVOID INCOMPATIBILITY : Caustics, Amines, Alkanolamines, Aldehydes, strong Oxidizing agents and Chlorinated compounds.

Pickling Liquid having multiple utility, Its multi directional uses have 8 products properties as follows:

1. Degreasing Action as METAL SURFACE CLEANER – Removes light mill oil and water based cutting fluid

2. RUST Cleaner as RUST REMOVER – Removes surface rust completely

3. Corrosion Inhibitor as RUST INHIBITOR – Provides years of indoor Rust Protection (more than 6 to 8 years).

4. RUST CONVERTER – Converts 100% Rust and provide Protective coating

5. Clean Surface for WELDING PREPARATION as a ANTI-SPATTER

6. Works as PRE-TREATMENT and CONVERSION COATING – Prepares the metal surface for Priming, Painting, Electro-static painting, Powder Coating etc. Also can be used with High Temperature Paint & Coatings(operating temperature up to 2000⁰F)

7. Resisit further oxidation and acts as a SEALER  RX Pickling Liquid coating seals by itself and stops further oxidation

8. RX Pickling Liquid effectively acts as a DE-SCALER (MILL SCALE, HEAT SCALE)– One Step De-scaling/De-Rusting removes mill scale & rust, provide a conversion coating and Seal the coating.

SAVING A LOT OF LABOR, TIME & COST, ALL IN SIMPLE ONE STEP PROCESS. ALSO ENVIRONMENTALLY SAFE, NON-HAZARDOUS, WATER BASED & READY TO USE PRODUCT.

Pickling Dip Liquid is Water based Conversion coating, Rust/Heat scale remover, Rust inhibitor, & Recommended Use Rust converter, Effectively used for Weld prep., Anti-spatter and a complete metal surface preparation/pre-treatment compound for ferrous & non-ferrous metal. 

Pickling Dip Liquid Savings:
1) “Value Added Product” which Saves a lot of labor, time, cost & energy by eliminating one or more traditional steps during metal surface preparation for welding and finishing (priming, painting, powder coating etc.)
2) Very large coverage (around 1600 sq. ft. per gallon
3) Unit Cost is few cents per sq. ft. along with a very less labor time. 
4) Long Shelf Life – No Wastage
5) Solves all quality failures such as, Welding failure, Adhesion failure as well as solving the Rusting problem completely. 

Pickling Dip Liquid manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Pickling Dip Liquid at a competitive price from us. We have ready stock of Pickling Dip Liquid in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

THE UNIT COST FOR THE PRODUCT IS FEW CENTS PER SQ. FT., BUT THE ACTUAL PRODUCT COST COMES OUT BELOW ZERO AFTER USE, BECAUSE OF ELIMINATING ONE OR MORE TRADITIONAL PROCESS STEPS. 


BENEFIT of Pickling Dip Liquid : 

1) Complete Rust Removal on any Metal surface (Ferrous and Non-ferrous metal)
2) Long term Indoor Rust Protection (for several years)
3) Welding, including welding on Hot rolled steel without removing the Mill scale
4) Priming, Painting, Electrostatic painting, Powder coating, Epoxy coating, Ceramic coating etc.
5) Metal surface preparation for High Temperature coating, such as Epoxy Coating (oven temperature around 500°F), Ceramic coating (baking temperature around 1800°F) etc.
6) One Step De-scaling/Coating of Hot Rolled steel (mill scale) & Heat scale at room temperature.
7) Used for metal surface preparation of New metal as well as for re-painting jobs after blasting (maintenance)
8) Injection Molding – For Die manufacturers as well as Injection molding companies (both Plastic & Metal)
9) STAINLESS STEEL PASSIVATION: Complete SS passivation of Stainless Steel by a dipping process at room temperature or in heated condition (to speed up process), with Zero Waste disposal. Replaces Nitric Acid Passivation Process.
10) Rebar Coating: New Rebar can be de-scaled/condition/pickle/coated/sealed by Pickling dip Liquid Picklex in one step for better corrosion resistance during storage and also inside concrete.