Description
Non Oxidising and a very effective controler of BACTERIA in water system.
It is a enviromentally safe and versatile anti microbial and a powerful anti oxidant, When it dissolved in water, it disintegrates to water, oxygen and carbon dioxide. All these degradation products are non toxic. It is a very powerful oxidant, whose oxidation potential outranges that of chlorine and chlorine oxides.
Dosage
Off-line CIP Addition
A dosage to achieve of 50 – 200ml/m3 should be added based on the combined volume of the CIP tank, pipework and the membrane housings. The contact time and recirculation time is dependent on the amount and composition of the fouling.
On-line Shock Treatment
Dose to the Feedwater to the RO plant at a rate of 10 – 50ml/m3 for a period of at least 1 hour and repeated as required to restore performance and maintain the membranes. NB Where bisulphite is used to remove chlorine upstream of the RO the dosage of Biocide DBNPA will need to be increased as the bisulphite neutralizes the DBNPA. For detailed advice on selection of cleaning programs, application rates and product please consult us using the enquires page
Technica Properties
Appearance Clear, colorless liquid
Physical State Liquid
Color Colorless
Odor Characteristic Odor
Odor threshold Not applicable
Boiling Point/Range 105 °C
Flash point Not flammable
Evaporation Rate No information available
Flammability (solid, gas) Not flammable
Flammability Limit in Air Not applicable
Upper flammability limit:
Lower flammability limit:
Vapor density No information available
Density 1.01 g/cm³ @ 20ºC
Specific gravity 1.01
Water solubility completely soluble
Solubility in other solvents No information available
Autoignition temperature Not combustible
Decomposition temperature 100 °C
Viscosity, dynamic No information available
Explosive properties No information available
Oxidizing properties Strong oxidizer
 Anhydrous.jpg)
 Anhydrous.jpg "Sodium Sulphite")
