Detergent & Soap-12

Iron Ore Red Dust Cleaner Usage Directions

Directions for Use

In general  Dilute 1 part Iron Ore Red Dust Cleaner with 4 parts water and spray  onto the surface being cleaned, And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate. 

And For Hard Deposits Vigorously agitate the on the surface being cleaned with a stiff bristled brush or broom. And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate. Again, vigorously agitate the surface. The iron ore will begin to break up and be released from the substrate.

Stubborn areas may need to be again saturated and left for a further 10 minutes before vigorously agitating.

Rinse the surface with a high pressure washer or hose until all dissolved concrete and Iron Ore Red Dust Cleaner has been removed from the surface being cleaned.

Safety and Environment Safety Iron Ore Red Dust Cleaner is classified as a skin irritant in its concentrate form and is classified as nonhazardous for transport according to the Australian Dangerous Goods Code. This “non-DG” classification also means less regulated storage of Iron Ore Red Dust Cleaner  containers on construction sites and industrial warehouses. Whilst Iron Ore Red Dust Cleaner displays a very low hazard profile for the user in terms of its effect on skin, eyes and respiratory system it is recommended to always wear protective gear including but not limited to chemical proof coveralls, goggles, gloves and rubber boots to minimize exposure to concrete residues and prolonged contact with Iron Ore Red Dust Cleaner

Biodegradation and Aquatic Safety Iron Ore Red Dust Cleaner is readily biodegradable, phosphate free and does not contribute to the eutrophication of waterways. 

Waste Water Systems Red Dirt Buster has very low COD and BOD levels making it an excellent choice for use where wastewater processing systems are used. It is, however, recommended that pH readings be taken to ensure that wastewater pH readings comply with board recommendations

Iron Ore Red Dust Cleaner is chemically iron ore and rust dissolving products which dissolve rust fast and removes tough rust and finally keep surface back to bare metal. Iron Ore Red Dust Cleaner completely also reacts with oxidized iron layers and looses to removes from surface.

Iron Ore Red Dust Cleaner is classified marine chemical Acidic detergent. We are one of popular and largest in ASIA marine chemicals manufacturer and supplier.

Iron Ore Red Dust Cleaner is specially formulated and developed to clean SHIP HOLD containing IRON ORE. We are keeping ready stock of Marine Chemicals and most popular marine chemicals supplier in Mumbai, Chennai, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Ajman, Muscat Barka, Sohar

PIG IRON, Iron Ore Pellets, Iron Ore Red Dust Cleaner manufacturer and supplier in Mumbai JNPT, Hazira Surat, Gandhidham Kandla, Navlakhi, Mundra, Sikka Jamnagar, Visakhapatnam, Gangavaram, Chennai Ennore, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Muscat, Sohar, ruwi, barka, Oman, Canada BC

This is very effective and well balanced products to remove rust from all kinds of surface. 

 *    Removes Iron Ore and rust stains without risk to paintwork.
 *    Safe on most common metals for Iron Ore deposits cleaning and Rust Removal.
 

Suitable hold cleaner plays important role to clean ship hold on time. Slection of cleaner always be wise decision to save time and perfectness on cleaning.  ALKAATUFF - ALKAATUFF is one of popular high foam alkaline cleaner which is also treated as versatile cleaner as well as plays role to neutralize acidic residue created by cargo on contact with moisture. Cement remover is also specialized product for cement wash, coal remover, lime remover, Bilge clean coat, Gypsum remover, PCS hold clean, Hold clean Bright, Muriatic Acid, Sodium Hypo Chlorite, Pet coke remover, Ship PolyCoat Hold coat Block etc. Some times we observed that presence of RXSOL NEW ORG on board also plays important role to degrease oil and soiled mass from surface. And Metal clean bright helps to remove rust from open hold surface area and also effective to dissolve rust stain from painted surface.

 Construction applications: SUPERPLASTICIZERS are used to reduce water in CONCRETE formulations. specially formulated organic plasticizer improves the workability of concrete, reducing water requirement and making the concrete stronger. It retards the setting of concrete so that transportation of RMC is not a problem. Benefits of these additives include improved strength, improved workability, improved durability of cement mixtures. This polymer mixture in cement mixtures control air pore content and prevent AGGLOMERATION of powders during the spray-drying process from the powder manufacturing and storage. Coating formulations with RXSOL-67-6704-210 containing polymers prevent calcium ions from being formed as LIME on concrete surface and improve the appearance and durability of coating.

Superplasticizer RXSOL-67-6704-210 ( High Range Concrete Superplasticiser )  is a brown color sulphonated formaldehyde condensate and sulphonated naphthalene with new generation polymners based admixture for use as a Superplasticizing admixture or high ranger Water Reducerad mixture for all types of concrete. This is in conformation to IS Code 9103:1999. Also meets the requirement of ASTM C 494 & type G and IS 9103-2003,  Suitable for ready mix concrete plants, it is capable of high workability retention up to 2-3 hrs with set retarding effect that helps to produce flowing concrete in hot climates. Further, it assists in long distance transportation of concrete at tropical atmosphere.

This has been formulated to reduce water requirement and to provide excellent plasticity and higher slump for both horizontal and vertical applications. RXSOL-67-6704-210 is manufactured under stringent quality control to ensure uniform and superior performance.

RXSOL-67-6704-210 imparts strong dispersion in the concrete reducing the total water demand in the mix. The reduction in water content also helps to achieve high ultimate strength. This is also very much useful for concrete with free pouring and pumpable consistency. Cement content of the concrete can also be economized with RXSOL-67-6704-210 due to its high cement dispersion property.

Plasticizers are organic or mixture of organic & inorganic substances. Plasticizer used to increase the workability of concrete with constant w/c ratio. it also allow the reduction of water for formation of concrete having same workability.

 Sodium Naphthalene Sulfonate Formaldehyde Condensate (SNF) Plasticizer Admixture for Concrete manufacturer and supplier in Fujairah, Sharjah, Ajman, Abudhabi, Dubai, Oman Muscat, Barka, Mumbai, Kandla Gandhidham, Kolkata, Chennai, Visakhapatnam, Canada, Sudan, Nairobi Kenya