Browse : A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z  
Featured Products 

Engine room Maintenance-16

PROPYLENE GLYCOL USP

Product Description | Product Application | Product Notes| Product DOSE
Propylene glycol is a humectant, which means that it is an ingredient that is added to cosmetics to increase moisture retention in skin and hair. Propylene glycol is well tolerated by the skin and shouldn't cause redness or irritation.
Code:
RXSOL-15-1615-215
Other Equivalent Brand

Propylene glycol also called 1,2-propanediol or propane-1,2-diol, is an organic compound with formula C3H8O2, MPG 215 Kg

Short Description:
Propylene Glycol USP is a widely used ingredient in pharmaceutical, food, cosmetic, personal care, flavors and animal feed applications
Generic Name:
1,2-propanediol or propane-1,2-diol
Add to Compare
|
Compare Now
Video not available
PROPYLENE GLYCOL USP
Application:
It is used to absorb extra water and maintain moisture in certain medicines, cosmetics, or food products. It is a solvent for food colors and flavors, and in the paint and plastics industries. Propyl [+] Read More...
Using Procedure:
According to the Material Safety Data Sheet on propylene glycol, the chemical is a strong skin irritant, and has been implicated in contact dermatitis. 
Note:
Propylene glycol is tolerated well by the skin and shouldn't cause redness or irritation. Propylene glycol is a penetration-enhancing humectant.   Propylene Glycol USP is a widely used ingredient in pha [+] Read More...
Technical Specifications:

 

Chemical Name : 1,2-Propanediol
Formula : CH3-CH(OH)-CH2OH; C3H8O2
Molecular Weight (g/mol) : 76.10
Assay : >99.8% by weight
Moisture : < 0.2% by weight
Boiling Point, 101.3 kPa (1 atm) : 187°C (369°F)
Distillation Range, 101.3 kPa (1 atm) : 186–189°C (367°F–372°F)
Vapor Pressure, 25°C : 0.017 kPa (0.13 mm Hg)
Freezing Point : Super Cools
Pour Point : < -57°C
Specific Gravity : 1.075 - 1.077
Refractive Index n20/D, 20°C : 1.4310–1.4330
Viscosity, 25°C : 48.6 centipoise (mPa.s)
Specific Heat, 25°C : 2.51 J/g°K
Flash Point,  Closed Cup : 104°C (220°F)
Autoignition Temperature : 371°C (700°F)
Thermal Conductivity, 25°C : 0.2061 W/m°K
Electrical Conductivity, 25°C 10 micro S/m

 

Remarks:

Propylene Glycol USP,  is a high-purity grade of monopropylene glycol for use in pharmaceutical, food, cosmetic, personal care, flavor and fragrance, plus a variety of other applications.It is a light, transparent liquid, almost odorless and with low volatility. It is completely soluble in water and in most organic solvents. In addition, all propylene glycols have a great capacity to hold and dissolve active ingredients equally which allows them to serve as carriers of aromas, flavors, dyes and moisture. 

Propylene Glycol USP is tested for compliance with the current USP, EP, and Japanese Pharmacopoeia (JP) specifications plus the Food Chemical Codex (FCC); it also complies with the Brazilian Pharmacopoeia, and other pharmaceutical, cosmetic and food regulations in the global markets where it is sold. It is listed by the Cosmetic, Toiletry and Fragrance Association as an approved ingredient in cosmetics and its use is reviewed by the Cosmetic Ingredient Review (CIR). Propylene Glycol USP is Kosher certified and complies with Halal requirements.

Storage and Handling :

Propylene Glycol USP is stable for at least two years when stored at ambient temperatures in closed containers and away from sunlight and other sources of UV light.Where product heating is utilized (i.e. for bulk storage and/or transport containers) the product temperature should be controlled to prevent unintentional overheating over extended periods as this may potentially lead to accelerated oxidative degradation of the product.

Mono Propylene Glycol MPG exporter and supplier in Mumbai, Chennai, Kolkata, Visakhapatnam, Gandhidham, Fujairah, Dubai, Ajman, Abudhabi, Muscat Barka Sohar, Oman, Canada, Sudan, Yemen, Michigan USA, Kuwait

#MonoPropyleneGlycolMPG_UAE
#MonoPropyleneGlycolMPG_Dubai
#MonoPropyleneGlycolMPG_Muscat
#MonoPropyleneGlycolMPG_Kuwait
#MonoPropyleneGlycolMPG_Mumbai
#MonoPropyleneGlycolMPG_Kolkata
#MonoPropyleneGlycolMPG_Visakhaptnam

PROPYLENE GLYCOL USP
:
Packing Size:
215.00 Kg.Liq
Available Packing Size:
Mono Propylene Glycol MPG is available in 25, 50, and 215 kg Metal Drum / HMHDPE drums.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Hydrogen Peroxide 6% Solution

Product Description | Product Application | Product Notes| Product DOSE
Hydrogen peroxide (H2O2) is the only germicidal agent composed only of water and oxygen. Like ozone, it kills disease organisms by oxidation! For this reason, Hydrogen peroxide is considered the world’s safest all natural effective sanitizer.
Code:
RXSOL-95-6190-500
Other Equivalent Brand

Hydrogen Peroxide, Mild Disinfectant and cleaning agent

Short Description:
Hydrogen peroxide is considered the world’s safest all natural effective sanitizer.
Generic Name:
Mild Disinfectan and cleaning agent
Active Matter:
6%
Add to Compare
|
Compare Now
Video not available
Hydrogen Peroxide 6% Solution
Application:
Application : Adults the elderly and children : Apply the solution directly with a PAD of cotton wool required.
Using Procedure:
Active Ingredient : Hydrogen Peroxide 6%
Note:
1. Cuts and infections Soak any infections or cuts in 3% for five to ten minutes several times a day. Even gangrene that would not heal with any medicine has been healed by soaking in Hydrogen peroxide. [+] Read More...
Technical Specifications:
Storage : Store below 30 degree Centigrade. Protect from light
Remarks:
Precaution :
Do not apply to wooden / broken skin, Product is flammable, Keep away from a naked flame. Frequent use may produce irritation and dry skin.  Avoid contact with eye, skin and clothes. Wash through after handling. Keep container tightly closed.

Hydrogen Peroxide 6% Solution supplier in Mumbai, Kandla, Visakhapatnam, Chennai, Kolkata, Fujairah, Dubai, Sharjah, Abu Dhabi.

Hydrogen Peroxide 6% Solution
:
Packing Size:
500.00 Bottle
Available Packing Size:
500 ml, 1000 ml.
Article News:
Why To Use Iron Sulphate in Plants?,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Aqua Clean Break

Product Description | Product Application | Product Notes| Product DOSE
RXSOL-16-3003-210 is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc.
Code:
RXSOL-16-3003-210
Other Equivalent Brand

AquaSol

Short Description:
Specialized for all types of cleaning and degreasing. Effective to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Effectively Clean Fibre Glass, Boats, Hulls and Painted Surfaces.
Generic Name:
Multipurpose Water Based Degreaser
Add to Compare
|
Compare Now
Aqua Clean Break
Application:
Can be used for all types of cleaning and degreasing including engine rooms and cargo tanks. Can be used as accoomodation cleaner for Bulkheads, Deck, Toilet etc. Sutable for clening of Soiled Textile [+] Read More...
Using Procedure:
Tank Cleaning:- (Cargo tank cleaning after mineral, animal, vegetable and fish oil. )                                                Method of Application and Doses:-  1st of all by stripping suction re [+] Read More...
Note:
Aquaa clean break RXSOL plays very important role in degreasing as well as cleaning action. Its unique formulation with polymer makes difference from other supplier.  
Technical Specifications:

Product Properties:-

 Appearance

Pale Yellow  Clear Liquid

 

Odour / Solubility

NONE / INFINITE IN WATER.

 

Density

In g/cm3 at 15°C: 1.0  +/- 0.05

 

Compatibility

 

 

Metal

Rubber

May Attack Zinc at concentrated solutions

No known effect

 

pH Neat

10-11

 

Packaging

Order No:RXSOL-16-3003-025

Size Ltrs:25 , 210

Characteristics:-

  1. Compatible with oily water separators.
  2. Releasing the oil phase for reclamation. Suitable for all types of floors. Deodorizing nature
  3. Eliminates the need to buy & stock duplicate productsdue to its effectiveness.
  4. An economic highly concentrated product.
  5. Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrcarbon  , Non flammable. Water based , Biodegradable .Safe to metal
Remarks:

Refer MSDS of Aqua clean break before its uses.
SPOT cleaning : Spray 20% concentration directly on SPOTED area and give 30 - 45 Minutes to work, Then finally rinse the surface area with WATER. 


Also refer this link :::
 

Aquaa Clean Break RXSOL 20 Ltr - Concentrated cleaning agent based on nonionic detergents, alkaline components, special components to stabilise the hardness and corrosion inhibitors for aluminium.RXSOL-16-3003-020

Aquaa Clean Break RXSOL 25 Ltrs - New technology surfactant degreaser for removal of grease, oil, sludge, carbon deposits, general dirt and grime. designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc.RXSOL-16-3003-025

Aquaa Clean Break RXSOL 210 Ltrs  -  Specialized for all types of cleaning and degreasing. Effective to clean Animal / Vegetable oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Effectively Clean Fibre Glass, Boats, Hulls and Painted Surfaces.RXSOL-16-3003-210

Aquaa Clean Break RXSOL HD 20 Ltr - Numerous general cleaning applications including the remover of grease, oil, sludge, carbon deposits, general dirt and grimeRXSOL-20-3017-020

Aquaa Clean Break RXSOL HD 25 Ltr  - Advanced degreaser for engine rooms and cargo tanks it can be used for all types of cleaning and degreasing including engine rooms and cargo tanks. Can be used as an accommodation cleaner for bulkheads, deck, toilet etc. Suitable for cleaning of soiled textiles such as rugs, cover, mats etc. EffectivelyRXSOL-20-3017-025

Aquaa Clean Break RXSOL HD 210 Ltr - Cargo tank cleaning after mineral, animal, vegetable and fish oil, Effective grease cleaner and free from caustic and hydrocarbons RXSOL-20-3017-210

Suitable hold cleaner plays important role to clean ship hold on time. Slection of cleaner always be wise decision to save time and perfectness on cleaning.  AQUAATUFF Ship Hold Cleaner - Alkatuff is one of popular high foam alkaline cleaner which is also treated as versatile cleaner as well as plays role to neutralize acidic residue created by cargo on contact with moisture. Cement remover is also specialized product for cement wash, coal remover, lime remover, Bilge coat, Gypsum remover, PCS hold clean, Hold CLEAN brite, Muriatic Acid, Sodium Hypo Chlorite, Pet coke remover, Slip Barrier Coat Hold Block etc... Some times we observed that presence of Sea Oil cleaner on board also plays important role to degrease oil and soiled mass from surface. And Metal clean bright helps to remove rust from open hold surface area and also effective to dissolve rust stain from painted surface.
 

Cargo Product 

Product Nature

Characteristics

Sulphur

Alkaline Cleaner

Alkaline Cleaner, AQUAATUFF Ship Hold Cleaner, Holdbrite

Anthracite - Hard Coal 

Alkaline Cleaner

AQUAATUFF Ship Hold Cleaner High Foam

Bauxite

Alkaline Cleaner

AQUAATUFF Ship Hold Cleaner High Foam

Bentonite

Alkaline Cleaner

AQUAATUFF Ship Hold Cleaner High Foam

Chrome Ore

Alkaline Cleaner

Alkaline Cleaner, AQUAATUFF Ship Hold Cleaner, Holdbrite

Clay

Alkaline Cleaner

Alkaline Cleaner, AQUAATUFF Ship Hold Cleaner, Holdbrite 

Dolomite

Alkaline Cleaner

AQUAATUFF Ship Hold Cleaner High Foam
Fluorspar - Calcium Fluoride, Fluorite Alkaline non foaming cleaner Aqua clean break PX + High Foam Agent
Gypsum - Calsium Sulfate, Mineral White Acidic Cleaner Metal Bright
Iron Ore Pellets Acidic Cleaner Metal Bright
Lime Sand, Lime Stone, Calcium Carbonate Acidic Cleaner Metal Bright
Magnesite Magnesium Carboante Acidic Cleaner Metal Bright
Magnetite IRON BLACK Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Magnese Ore Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Zinc Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Lead Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Copper Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Pyrite Iron Disulfide, Iron Pyrite, Pyrox Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Phosphate Rock Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Quartz, Silicone Dioxide, stone Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Talk, Magnesium Talc, Soapstone Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Vanadium Ore Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High Foam
Aluminum Dross Alkaline non foaming cleaner Aqua Clean break PX + High Foam Agent
Ferro Alloys Acidic Cleaner Metal bright HD
Granulated Slag Acidic Cleaner Metal bright HD
Hot Briquetted Iron HBI Acidic Cleaner Metal bright HD
Magnesite, Magnesium Oxide Acidic Cleaner Metal bright HD
Millscale Iron ORE Acidic Cleaner Metal bright HD
PIG IRON Acidic Cleaner Metal bright HD
Zinc Ashes Alkaline non foaming cleaner Aqua clean break PX + High Foam Agent
Zinc Dross Alkaline non foaming cleaner Aqua clean break PX + High Foam Agent
Zinc Residues Alkaline non foaming cleaner Aqua clean break PX + High Foam Agent
Brown Coal Briquettes, Lignite Brown Coal briquetties Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Calcined Petroleum Coke Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Coal, COKE, Petcoke - Petroleum coke Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Castor Beans Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Copra Dry Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Fish Meal Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Peat Moss Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Seed Cake, Solvent Extracted Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Soya Beans Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Sunflower Seed Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
Wheat Alkaline Cleaner AQUAATUFF Ship Hold Cleaner High foam
CEMENT Acidic Cleaner Cement Remover, Metal Bright, Descaing
Cement Clinker Acidic Cleaner Cement Remover, Metal Bright, Descaing
Fly Ash Alkaline Cleaner AQUAATUFF Ship Hold Cleaner high Foam
     

Aquaa Clean Break Supplier in Mumbai, Kandla Gandhidham, Kolkata Haldia, Visakhapatnam, Chennai Ennore, Gangavaram, Surat Hazira, Sikka Jamnagar, Fujairah, Ajman, Dubai, Sharjah, Abudhabi, Middle East UAE

Ship Tank Cleaning, Deck Cleaning and multi purpose cleaner

Aqua Clean Break
:
Packing Size:
210.00 Ltr.
Available Packing Size:
5, 20, 25, 35, 50, 210 Ltr
Article News:
Marine Chemicals Manufacturers and Suppliers in India, UAE, Canada,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Sodium Hypo Chlorite

Product Description | Product Application | Product Notes| Product DOSE
A 12% solution is widely used in waterworks for the chlorination of water and a 15% solution is more commonly used for disinfection of waste water in treatment plants. High-test hypochlorite (HTH) is [+] Read More...
Code:
RXSOL-31-3025-060
Other Equivalent Brand

Fungicide and an oxidizing bleach / Sodium Hypo Chlorite (12-15%), Bleach 1000 Ltr PACK

Short Description:
Waterworks for the chlorination of water
Generic Name:
NaClO
Information:

Sodium Hypo chlorite Bleach manufactred by RX MARINE INTERNATIONAL is highly concentrate toward saturated chlorine value. We are well known sodium hypochlorite manufacturer and supplier in India and Middle East. Our products are bsed on electro chemical process where sodium works as cation and a hypochlorite in the form of anion.

Active Matter:

12 - 15%

Add to Compare
|
Compare Now
Video not available
Sodium Hypo Chlorite
Application:
Also used as a disinfectant and germicide , especially in the sterilization of water. It is also used for making wool unshrinkable and in the manufactire of chloroform. For [+] Read More...
Using Procedure:
A weak soln. ( 1.2 % ) is used. For purifying water 0.02 to 0 .2 % volumetric is sufficient for Potable Water Treatment General formulation to calculate  how much bleach is needed to add to a tank or a pi [+] Read More...
Note:
Note : Store in cool place UN No :  1791 IMDG CLASS : 8 PACKING GROUP : III ODOUR  : IRRITATING , PUNGENT ODOUR R31: Contact with acids liberates toxic gases R34: Causes burns S-PHRASES S1/2: [+] Read More...
Technical Specifications:

SODIUM HYPOCHLORITE

ACTIVE INGREDIENT:

            Sodium Hypochlorite as Chlorine                           : 15%

            Sodium Hydroxide                                                 :   1%

INERT INGREDIENTS:                                                      : 84%

             Total                                                                        100%   

Remarks:

HANDLING AND STORAGE PRECAUTIONS:

Do not store adjacent to chemicals that may react if spillage occurs. Comply with Oman regulations, when shipped. If closed containers become heated, vent to release decomposition products (mainly oxygen under normal decomposition). Do not mix or contaminate with ammonia, hydrocarbons, acids, alcohol or ethers.

DO NOT REUSE CONTAINERS: Product residues may remain in containers. All labeled precautions MUST be observed. Dispose of container in a manner meeting government regulations.

PRODUCT DISPOSAL:  Product should be completely removed from containers. Material that cannot be used or chemically reprocessed should be disposed of, in a manner meeting government regulations.

Sodium Hypochlorite, Bleach sodium hypochlorite uses, sodium hypochlorite ph value plays very important role during chlorination. sodium hypochlorite formulation chemically defined as sodium cation and a hypochlorite anion.Sodium hypochlorite also popular as disinfectant cleaner. 

Sodium hypochlorite msds is available through above link, Otherwise kindly share your request through our email id rxmarine@gmail.com

We are keeping ready stock of Sodium Hypochlorite NaOCl for sale in India and Middle East.  We are not only providing Sodium Hypochlorite Solution, but also having complete solution for Ship marine Industries. We are keeping full range of Deck/Engine/Cabin Stores Chemicals Hold cleaning chemicals, Tank Cleaner Detergent, Boiler and cooling water treatment chemicals. Among Ship Chandlers in India's and UAE we are most popular name to supply all kinds of Marine chemicals. We covers and stock all chemicals at Kandla, Mundra, Sikka, Hazira, Mumbai (Bombay), Jnpt, Pipavav, Manglore, Chennai - Ennore, Vizag - Visakhapatnam, Gangavaram, Kakinada, Kolkata - Haldia - Paradip, Fujairah, Sharjah, Dubai Abu Dhabi.

We are popular among shipchandler and our other exhisting customer as a quality product Manufacturer of Sodium Hypo Chlorite, Suppliers of Sodium Hypo Chlorite, Dealers of Sodium Hypo Chlorite in India and UAE. 

Sodium Hypochlorite manufacturer and supplier in Muscat Oman, Fujairah UAE Middle East, Sharjah, Dubai, Abudhabi, Diera, Ajman, Hazira, Surat, Kandla Gandhidham Deen Dayal Upadhyay, Sikka Jamnagar, Navlakhi GUJRATGIDC, Mumbai, JNPT Nhava seva, Manglore, Goa, Chennai - Ennore, Kakinada, Visakhapatnam, Gangavaram, Kolkata, Haldia, BujBuj, Paradip, Tata, Ranchi, Patna, Varanashi

Sodium Hypochlorite most commonly use to bleach water, as a cleaner, as Disinfectant, and Water Treatment purpose.

Sodium Hypo Chlorite
:
Packing Size:
1000.00 Ltr.
Available Packing Size:
1, 2, 5, 25, 30, 50, 60, 210, 250 Ltrs / Kg
Article News:
Shipchandler in Vizag Port, ALKAATUFF cleaning chemicals for ship hold, Eco Friendly Micro Shield Supplier In Turbhe, Gandhidham, Paradip, Vizag, and Fujairah, Sodium Hypochlorite in Navi Mumbai, SODIUM HYPOCHLORITE SUPPLIERS IN NAVI MUMBAI, MUMBAI, VASHI, MIDC, TURBHE, Sodium Hypochlorite, Disinfectants Supplier in India, WHY IS HYPOCHLOROUS ACID MORE EFFICIENT AT KILLING PATHOGENS,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Total Hardness Solution

Product Description | Product Application | Product Notes| Product DOSE
Total hardness include Temporary Hardness and Permanent Hardness
Code:
RXSOL-60-5531-002
Other Equivalent Brand

Short Description:
Total hardness include Temporary Hardness and Permanent Hardness.
Add to Compare
|
Compare Now
Video not available
Total Hardness Solution
Application:
Determination of Temporary Hardness  Temporary hardness of water is caused by the presence of bicarbonates of calcium or magnesium. Hence its amount is estimated by directly titrating [+] Read More...
Using Procedure:
Determination of Permanent Hardness  When a measured excess of standard sodium carbonate solution is mixed with a known volume of hard water, the calcium and magnesium salts [+] Read More...
Note:
Technical Specifications:

To determine both the temporary and permanent hardness of the given sample of water 

Water is turned out to be hard owing to the presence of calcium or magnesium bicarbonates and chlorides or sulphates of calcium or magnesium. Correspondingly they are known as temporary hardness and permanent hardness of water. Both temporary and permanent hardness of water are expressed as their equivalents of CaCO3 in parts per 1,00,000 parts of water. This is referred to as Degrees of Hardness of water. For example, if a sample of water contains 10 parts of CaCO3 in 1,00,000 parts of water, it is said to possess 10 Degrees of hardness. 

Determination of Temporary Hardness 

Temporary hardness of water is caused by the presence of bicarbonates of calcium or magnesium. Hence its amount is estimated by directly titrating with a standard solution of an acid. 

Exactly 100 ml of the given sample of water is buretted out or pipetted out into clean conical flask. Two drops of methyl orange indicator are added to it and titrated against HCI acid from the burette. When the water turns to a pale pink colour, the addition is stopped and the reading is noted down. Another titration is conducted for concordancy. 

Determination of Permanent Hardness 

When a measured excess of standard sodium carbonate solution is mixed with a known volume of hard water, the calcium and magnesium salts are completely precipitated as their insoluble carbonates. After filtration, the unreacted sodium carbonate is determined by titrating against standard HCI using methyl orange as the indicator. From the volume of hydrochloric acid equivalent in alkali carbonate, the amount of hardness is calculated. 

A 100 ml of the given sample of water is accurately measured out into a clean conical flask. It is boiled for half an hour. This removes the temporary hardness. To this water, a 10 ml of 0.1N Na2CO3 solution is added and boiled for an hour. The solution is cooled and a freshly prepared distilled water is added to make up the volume loss by evaporation. It is filtered through a filter paper and the filtrate is collected in a conical flask. Two drops of methyl orange indicator are added to the filtrate and titrated against the standard HCI taken in the burette, until the solution becomes of pale pink colour. A duplicate experiment is conducted. From the volume of HCI consumed, the permanent hardness of water is calculated. 

(i) Temporary hardness of the given sample of water = ... degrees.
(i) Permanent hardness of the given sample of water = ... degrees. Calculation
 

Calculation

1. Temporary Hardness

CaCO3 + 2HCl >>>> >>>>>>>>>>>>CaCl2 + H2O + CO2
100 g of CaCO3                                             2,000 ml of 1N HCl
Titration value                                     3.2 ml of 0.1025N HCl
3.2 ml of 0.1025N HCl                 =    3.5 ml of 0.1N HCl
100 parts of the water required       =  3.5 ml of 0.1N HCl 

1,00, 000 parts of water will require 3.5 / 100 x 1,00,000 = 3500 ml of 0.1N HCl 

 

1,00,000 parts of water will require  = 350 ml of 1N HCl
As per the equation, 1 ml of 1N HCl  = 0.05 g of CaCO3
1 ml of 0.1N HCl  = 0.005 g of CaCO3

350 ml of 1N HCl = 350x0.05 g of CaCO3

                              =17.50 g of CaCO3 

Degree of Temporary Hardness  = 17.5 Degree 

 

2. Permanent Hardness 
 

 

Titration value     = 7.3 ml of 0.1025N HCl

7.3 ml of 0.1025N HCl  = 7.5 ml of 0.1N HCl
Volume of the water sample taken = 100 ml
Amount of Na2CO3 added  = 10 ml of 0.10 N
Amount of Na2CO3 = 7.5 ml of 0.1N HCl 
7.5 ml of 0.1N HCl = 7.5 ml of 0.1N Na2CO3

Amount of Na2CO3 reacted  = 10 – 7.5
                                             = 2.5 ml of 0.1N Na2CO3
                                             = 2.5 ml of 0.1N HCl 
 

1 ml of 1N HCl       = 0.05 g of CaCO3
1 ml of 0.1N HCl   = 0.005 g of CaCO3  
2.5 ml of 0.1N HCl =0.005x25
                                = 0.0125 g of CaCO3 
 

Amount of CaCO3 in 1,00,000 parts = ( 0.0125/100 ) 1,00,000
                                                          = 12.5 g 

Permanent Hardness = 12.5 Dgree 

Total Hardness = 17.5 +12.5 = 30 Degree 

 
 
Remarks:

Test for Hardness of water: 

Reagents: 0.01 M EDTA Buffer solution 

Eriochrome Black T indicator 

Standard EDTA solution 

Disodium dihydrogen ethylenediamine tera acetate (A.R.) is available commercially and can be used as a primary standard. However, many samples contain moisture which is difficult to remove through drying. In such cases the solution is standardized against standard zinc or magnesium solution. Its molecular weight is 372.25 and after drying at 80oC it can be weighed out a accurately. 

1.Eriochrome Black T: This substance is sodium (I-hydroxy-2- naphthylazo)-6-nitro-2-naphthol-4-sulphonate). It is also known as Solochrome black or WDFA. etc. In strongly acid solution Eriochrome Black T (EBT) polymerises to a red brown product, and the metal complexes are usually red in colour. 
 

 

The colour at different pH given by Eriochrome black T are: 

Red - below pH 5.5
Blue - between pH range 7-11
Yellowish orange - above pH 11.5

 

Between pH range 7-11, when metallic salts are added, the colour of the indicator changes from blue to red. At the end point in EDTA titration the indicator will be set free and colour change will be from red to blue. 

Preparation of Eriochrome Black T as indicator 

(i) the solution of indicator is prepared by dissolving 1 g of Eriochrome Black T in 15 ml of trienthanol amine and adding 5 ml of absoluta alcohol. It can also be prepared by dissolving 0.2 g of Eriochrome Black T in 20 ml of absolute alcohol. Use about 3 to 4 drops of the indicator solution. 

(ii) 1 g of the indicator is grinded with 100 g of NaCl to a very fine powder. This mixture is stored in a well stoppered bottle. Use about 0.2 g of indicator in each titration. 

Procedure: 

. 20 drops of sample water was take in a dry test tube with a calibrated pipette. 

. Adding 2 drops of butter solution to the tube.
. Adding a pinch of Eriochrome Black T indicator to the tube. 

. Stir the solution. The colour of the solution will became wine red. 

. Adding EDTA with another pipette till the colour changes to blue. . Counting the drops of EDTA. 

Calculation: 

Volume of EDTA = no. of drops of EDTA x drop value of pipette = V1 Molarity of EDTA = M1
Volume of water = no. of drops of water x drop value of water = V2 Hardness (mg/L) = V1 x M1 x 105/V2 

Result: The hardness of sample water is ___________ 

To determine magnesium against EDTA using Eriochrome Black T as an indicator. 

Material required 

(i) 0.1 M EDTA solution: Dissolve 37.225 g of EDTA into 1000 ml of volumetric flask, in redistilled water and make upto the mark with the same water. 

(ii) Eriochrome Black T (EBT) indicator solution. 

(iii) Buffer solution (pH 10): Add 57 ml of concentrated ammonia solution (sp. gr. 0.88) to 7 g of NH4Cl (A.R.) and dilute to 100 ml with distilled water. 

(iv) Magnesium ion solution (0.1M): Weigh accurately 0.61 g of magnesium turning and dissolve in HCl. Neutralise the resulting solution with M-sodium hydroxide. Transfer in to a 250 ml volumetric flask and dilute the solution with distilled water up to the mark. MgSO4.7H2O can be employed for preparing the solution. Weigh accurately 7.10 g magnesium sulphate heptahydrate and dissolve in water and dilute to 250 ml. 

MgSO4 + Na2C10H14O8N2 page10image9192 page10image9192MgC10H14O8N2 + Na2SO4 

Procedure 

Take 250 ml of the magnesium solution in a conical flask, dilute to about 100 ml with distilled water. Add 2 ml of the buffer solution (pH10). Add 4-5 drops of indicator solution and titrate against 0.1M EDTA solution with constant solution stirring until the colour changes from red to blue at the end point. 

1 ml of 0.1M EDTA = 2.432 mg of Mg. 

Precautions: 

1. EDTA should be dried be remove moisture in the preparation of its solution. 

2. Redistilled water should be employed for preparing the EDTA solution. 

3. Polyvalent cations, if present, interfere and hence should be removed as hydroxides. 

4. The colour change near the end point is very slow. Care should be taken to avoid over titration. 

To determine calcium against EDTA using Murexide as an indicator. Materials required
(i) 0.01 M EDTA solution:
(ii) Murexide indicator solution: 

(iii) NaOH solution: Prepare 1M aqueous solution. 

(iv) Calcium ion solution (0.01 M): Weigh accurately 0.50 g A.R. CaCO3 and transfer the salt in a 500 ml measuring flask. Dissolve the salt in minimum quantity of 6M HCl adding drop by until effervescences stop and the solution become clear. Make up the mark. 

Procedure 

Talk 25 ml of the calcium solution, dilute to 100 ml with water and add 2 ml of 1 (M) NaOH solution to have a solution of pH about 12. Add few drops of murexide indicator and titrate against standard EDTA solution. The colour chang at the end point is from red to purple. 

Calculations 

1 ml of 0.01 M EDTA = 0.4008 mg Ca 

To determine Ca2+ and mg+ ions in a given solution and estimate total hardness of water 

 

The mixture having ca2+ & mg2+ ions is titrated in one aliquot of pf the sample solution and ca2+ ions are titrated in a further aliquot in strong alkaline medium in which Mg2+ ions get precipitated. Mg2+ ions are then evaluated from the difference. 

Materials required 

0.01M Ca2+ and Mg2+ ions solution, 0.01M EDTA, 2M NaOH, buffer pH. 10, Murexide and Erio T indicators. 

Procedure 

(i) Pipette out 25 ml of the solution (Ca2+ and Mg2+ ions) into a conical flask. Add 5 ml of buffer (pH = 10) and dilute to about 50 ml of redistilled water. Now add 3 – 4 drops of Erio T indicator. Warm the solution upto 600C and titrate with EDTA until the colour of the solution changes from wine red to clear blue. Titrate slowly near the end point. Suppose A ml be the volume (in ml) of EDTA used. 

(ii) Pipette out 25 ml of the solution (Ca2+ and mg2+ ions) into a conical flask. To this add 5 ml of 2M NaOH solution and 2 – 3 drops of Murexide indicator. After diluting the solution to about 25 ml with distilled water, titrate with EDTA until the colour changes from red to purple. Suppose B be the volume (in ml) of EDTA used. 
 

Calculations 

B x 0.4008 = mg of Ca 
(A – B) x0.2532 = mg of Mg. 

In order to obtain the total amount of these ions present in solution, the number are to be multiplied by 100/Q, where Q is the volume (in ml) of the aliquot, i.e. 25 ml.
Estimation of the hardness of water: It is expressed in parts per million, ppm. of Ca. 

B/x x 0.4008 M = ppm Ca where B=ml of EDTA 

x = ml of tap water
M = Molarity of EDTA 


#TotalHardnessSolutionTESTkit_MANUFACTURER


Total Hardness Solution manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Total Hardness Solution at a competitive price from us. We have ready stock of Total Hardness Solution in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.


Total Hardness Solution
:
Packing Size:
1.00 Box
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Degreaser Heavy Duty

Product Description | Product Application | Product Notes| Product DOSE
Excellent for removal of oil and grease.  Readily soluble in water in all proportions. It is a unique formulation blended from inorganic, organic compounds and detergents with powerful dispersing agen [+] Read More...
Code:
RXSOL-10-1005-025
Other Equivalent Brand

REM-25, Heavy Oil Remover / Drew Clean 2000, Care clean Degreaser GP. Mariclean, Dumbuster Liquid, HDE 777, CLEANER 1155, SEA SHIELD DEGREASER 79115, OSGR, Arrow C180HDD Heavy Duty Emulsifiable Solvent Degreaser, BYCOTEST- C5 CLEANING AGEN, SUPERVIX, Degreaser Heavy Duty 25 Ltr

Short Description:
Powerful Emulsifiable Solvent Degreaser with dispersing agents. Readily soluble in water in all proportions. It is non-corrosive to metal like copper, aluminium, mild steel and plastic. It is non-toxic which makes handling easy.
Generic Name:
Oil Grease cleaner Emulsifiable Solvent Degreaser
Did you Know?

Heavy Duty Degreaser works effectively, where regular cleaners will not perform

Active Matter:
93-98%
IMPA Code:
551011, 55100, 551002
Add to Compare
|
Compare Now
Degreaser Heavy Duty
Application:
Complete removal of dirt, oil, carbonised grease, heavy oil , gum, vegetable oil, lube oil, soot, asphalt, carbon stains etc. Gives clear finish to the surface. Excellent for use as a wash for fuel ta [+] Read More...
Using Procedure:
Depending upon contamination 2-25% with fresh water. It is an extremely versatile heavy duty cleaner suitable for use in soak tanks, high pressure washers, Automated Scrubbing machines and for manual use.
Note:
RXSOL-10-1005-025  is easily soluble in water Action is quite fast even at low temperature which gives advantages of cleaning under operation And avoid shut down and down time. Non corrosive to most of the [+] Read More...
Technical Specifications:
Remarks:

PROEDURE OF USE:-

1st Method:-
Mix 1 part of RXSOL-10-1005-025 with 2 -10 parts of water / GAS-OIL  , For heavy oil,greasy surface use directly)Spray directly on the entire surface to be cleaned. This can be achieved by Hand spray / mechanical spray pump. Immediately after 2 -5 minute of spray the RXSOL-10-1005-025 starts its function. The Dirt, oil grease etc will loosen. 5 to 6 minutes after spraying start rinsing the system with water (High pressure recommended). Dirt and mud starts vanishing with cleaning media and water.

2nd Method:-
Application in immersion process with or without ultrasonic support, manual wipping.

3rd Method:- 
RXSOL-10-1005-025 is also used in conjunction with alkaline degreasing bath at 3-5% (v/v) concentration for better and quick degreasing action. Eithers the bath is heated to be 70c or the solution can be stirred or air agitated.

Powerful Emulsifiable Solvent Degreaser with dispersing agents. Readily soluble in water in all proportions. It is non-corrosive to metal like copper, aluminium, mild steel and plastic. It is non-toxic which makes handling easy.

#HeavyDutyDegreaser
#DegreaserMuscatOman
#DegreaserHeavyDutyDubaiUAE
#DegreaserMumbaiKolkataChennaiVizagGandhidham

REM-25, Heavy Oil Remover / Drew Clean 2000, Care clean Degreaser GP. Mariclean, Dumbuster Liquid, HDE 777, CLEANER 1155, SEA SHIELD DEGREASER 79115, OSGR, Arrow C180HDD Heavy Duty Emulsifiable Solvent Degreaser, BYCOTEST- C5 CLEANING AGEN, SUPERVIX, Degreaser Heavy Duty 25 Ltr

We are supplier and stockist of degreaser at all major Indian ports and Middle East ports. We are popular among Ship Suppliers and Chandlers and shipping agent as a marine chemicals supplier which includes Refrigerant Freon 22, Laundry Soap and Detergents, Cleaner and Polish Goods, Hold cleaning and tank cleaning detergent, Oil spill dispersant, carbon remover, Electrocleaner, Water less hand cleaner, Teepol, Coolant, Glycol, Boiler and cooling water treatment chemicals etc...

Degreaser Heavy Duty manufacturer and supplier in Mumbai,Ruwi, Ghala, Barka, Muscat, Oman, Salalah, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Kolkata, Haldia, Paradip, Visakhapatnam, Chennai, Ennore, Navi Mumbai MIDC

34029019

We supply all marine chemicals products & Lubricants .We arrange to supply Shell /Castrol /Servo / Mobil oils, EP2 Grease, Molykote, Molyslip, Aerosol, Silicone, Petrol, Paraffin oil, coal tar, fish oil, tallow, turpentine, white spirit, Teflon coating, Rustolvo, silicon grease, aerosol spray, molyslip, copaslip, greases, degreaser etc...
 

MARINE CHEMICALS MANUFACTURER SUPPLIER INDIA DUBAI UAE MUSCAT OMAN
MARINE CHEMICALS supplier in United Arab EMIRATES, OMAN, INDIA
Antifreeze Descaling Liquid Oil Spill Dispersant
Air Cooler Cleaner Disc Clean  One Shot Bwt
Alkalinity Control Distilled Water Oxygen Scavenger
Autotreat Ecoclean Oxytreat
Bilge Cleaner Ecosperse Ph Minus
Boiler Coagulant Electric Motor Cleaner Ph Plus
Carbon Cleaner Electrocleaner Rig Wash
Cement & Concrete Cleaner Electrosol Quick Rocor NB
Chlor 12 Enviro 2000 Rust Convertor
Condensate Cleaner Enviroclean Rust & Scale Remover
Coolant/ Antifreeze Fuel Oil Treatment Seaclean
Deck Cleaner Hand Cleaner Soot Remover
Degreaser Hand Gel  Tank Cleaner
Descalex Liquid  Metal Brightener Universal Wash
Descalex Powder NCLT Vap Treat
Degreaser Heavy Duty
Degreaser Heavy Duty
:
Packing Size:
25.00 Ltr.
Available Packing Size:
5, 10, 20 ltr, 25, 50, 210 ltr. Customized packing with Private labelling option also available to us. Mail us for factory sale heavy discount option.
Article News:
Degreaser Heavy Duty, Natural Blue Parts cleaner, Degreaser Heavy Duty,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

ACC9 Air Cooler Chemical

Product Description | Product Application | Product Notes| Product DOSE
ACC9 Air Cooler Chemical is a powerful emulsify cleaning solvent emulsion cleaner for cleaning of diesel engine air coolers, Oily contaminated parts scavenging air systems and compressor. Air Cooler C [+] Read More...
Code:
RXSOL-16-0009-020
Other Equivalent Brand

Mite ACC ,RXSOL 79101 ACC , Care Clean ACC , Air Cooler and Air Conditioner Cleaner Merichem, Air Intercooler Cleaner 20 Ltr PACK, DREW ACC-9

Short Description:
Penetrates and dissolves accumulated deposits oil and greasy soiled parts of an air cooler, ACC-9 classified one of best cleaner to protect SOFT METAL
Generic Name:
Cleaner for Air cooler to clean oil and greasy soiled deposits
Information:

 ACC-009 is specified marine and oil field cleaning chemicals to maintain diesel engine charge Air cooler with full work efficiency. ACC9 emulsifie all types of oil-soiled and effectively removes clean all types of contaminants. ACC9 is fully developed new generationg product with anti corrosive properties emulsifier and inhibitors to  dissolves accumulated deposits.

Active Matter:
94%
IMPA Code:
551005, 551203, 551204, 551006, 551338, 551406, 553338
Add to Compare
|
Compare Now
ACC9 Air Cooler Chemical
Application:
During the operation, the fins & tubes of the main engine air cooler which become fouled with oil, grease, dust and carbonaceous deposit , which will affect cooler efficiency and damage the system. AI [+] Read More...
Using Procedure:
For effective cleaning of air coolers, scavenging air systems and turbo chargers of diesel engines. 3 to 5 litres of cleaning solution per square meter or as table below:       Engine HP.                So [+] Read More...
Note:
Field :: - AHU, FCU, Air Conditioners, Car Condenser and Radiator, Air Cooled Chillers, Air Cooled Condensers, Air Cooler Tube Bundle etc. Air Cooler Chemical enabling excellent penetration of the produc [+] Read More...
Technical Specifications:

ACC9 AIR COOLER CHEMICAL Cleaner is watersoluble product and classified as best AIR Cooler Cleaning Chemical for shipping and marine industries. We are working with this product since 1995 and on our daily routine cleaning operation given us opprtunity to select non corrosive solvent to formulate ACC9 along with powerful new genration emulsifier, detergent and inhibitors. When ACC9 Air Cooler Chemicals Cleaner is spread on greasy soiled parts, Air Cooler Chemical ACC9 chemically penetrate inside the soiled area and finally resulting with emulsifying action with water. This cleaning concept help to removes all soiled greasy part without mechanical rubbing and friction action. As manual scrapping and rubbing cleaning action directly damaging the surface area of metal parts. This is the reason why engineer always have suggestion to avoid mechanical rubbing cleaning procedure. 

Remarks:

Application

Immersion bath
Atleast for 2 Hrs deep COOLER PARTS in to  AIR COOLER CHEMICAL CLEANER emulsion tank. The product should be heated to approx. 50°C and agitation provided with an air line. Then drain off and flush well with water, followed by drying with an air line.

Soak method: Machine parts with stubborn carbon deposits to be cleaned is dipped into conc.Soln.of ACC then allow deposits to. Be broken down and loosened before removal, then rinse .


Circulation method
Some designs of cooler can be circulated "in situ". In this case a pump tank and pipe system is fitted permanently or connections are provided for connecting a temporary circuit. The system should be filled with AIR COOLER CHEMICAL CLEANER circulation carried out for 2 - 4 hours at a temperature of upto 50°C. After cleaning the cooler should be thoroughly flushed with fresh water and dried with an air line.

Note: Both cleaning methods benefit from heat of up to 50°C and cleaning times can be reduced or extended dependant on temperature and degree of fouling.
 

Hand spray Cleaning: By Hand spray,apply concentrate RXSOL-16-0009-210 all over the cooler coils. for good emulsification & penetration. Allow the RXSOL-16-0009-210 for a minimum of 1 hour,then use a high pressuure  water to  wash  off  the  loosened deposits. During process  always  keep drain valve  open. After satisfactory cleaning, and flushing through with fresh water, close air cooler drains.Note that during this process the engine must be  stopped.

ACC9 is industrial equipment maintenance air cooler chemical cleaner for cleaning of the diesel engine charge Air cooler. ACC9 is Light yellow to brown colored water-soluble solvent, which emulsifies with water. ACC9 is blend of the selected specified solvent mixture which is safe in contact with all metals.


ACC-9 Air Cooler Chmeical Cleaner Principally works as follows :
Non Corrosive Solvent present in ACC9 helps to dissolve all deposits, oil, greasy materials. While emulsifier increases Detergency property to enhance cleaning action of ACC-9. And the presence of inhibitors in ACC9 Air Cooler Cleaning Chemical protect soft metal, we can say INHIBITOR makes solution safe to contact with all metals.



ACC9 Air Cooler Chemicals Cleaner supplier and stockist in Mumbai - Navi Mumbai MIDC, Maharastra, Surat - Hazira, Kandla - Gandhidham, Mundra - Gujrat, Manglore - Goa, Visakhapatnam - Gangavaram - Kakinada, Chennai - Ennore, Kolkata - Haldia - Paradip, Fujairah - Dubai - Sharjah, Abudhabi, Ajman, Muscat Barka Sohar Oman, Sudan, Yemen, Nairobi, Surat Gujrat


ACC9 Air Cooler Chemical
:
Packing Size:
20.00 Ltr.
Available Packing Size:
1, 5, 25, 35, 50, 210 Ltr. Penetrates and dissolves accumulated deposits of oil and greasy soiled parts of an air cooler, Air Cooler Chemicals ACC-9 is classified as one of the best cleaners. Mail us for the factory sale discounted price. This product effectively dissolves and cleans the heavily deposited contaminant of the diesel engine charade air cooler.
Article News:
Air Cooler Cleaning Chemical price for Mumbai based Ship chandler, Turbocharger cleaning chemicals, Air cooler cleaning chemical MSDS, Air Cooler Cleaning Chemical, Carbon Remover quickly break down carbon deposits, RX Marine Contact Details, Marine Chemicals supplier, Why Marine Chemicals?, Marine Maintenance ship cleaning detergent chemicals, Sale Dhamaka on Marine Chemicals, Marine Chemicals for Ship engine maintenance, Marine Chemicals for ship, Marine Chemical, Why Marine Chemical, Marine chemical largest supplier in Mumbai India, Marine Chemical for Ship Hold Cleaning, FREQUENTLY ASKED QUESTIONS for MARINE CHEMICALS, Marine Chemicals for ship maintenance and Cleaning, Teepol Composition, VALUABLE MARINE CHEMICALS for SHIP MAINTENANCE and SHIP HOLD CLEANING,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Scale Inhibitor 4300 High Polymer

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-33-3340-035
Other Equivalent Brand

Acumer 4300 Scale Inhibitor, Hardness Stabilizer 220 Kg Liquid packing

Short Description:
Scale Inhibitor 4300 Rx is a high performance polymer based scale inhibitor.
Generic Name:
HARDNESS STABILIZER- POC 3000
Active Matter:
81-90
Add to Compare
|
Compare Now
Video not available
Scale Inhibitor 4300 High Polymer
Application:
Mechanism of Action Maleic polymers are known to be excellent calcium carbonate inhibitors and crystal modifiers but many exhibit only fair calcium sulfate deposit control. A new polymer, Scale In [+] Read More...
Using Procedure:
Performance Advantages with  Scale Inhibitor 4300 RX Polymer Scale Inhibitor The following tables compare the product efficacy of  Scale Inhibitor 4300 Rx  polymer with other scale control agents for inh [+] Read More...
Note:
Technical Specifications:

Typical Properties :

Appearance Liquid clear
Type Maleic Multipolymer
Odour Odourless or Mild odor

Molecular weight¹

 2000
pH 6.5 - 7.50
% Total solids 50
% Actives 60-90
Viscosity, as is, mPa.s/cps² 400-1200

Scale Inhibitor 4300 High Polymer supplier in Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Sharjah, Dubai, Ajman, Abudhabi, UAE, Ruwi, Barka, Muscat Oman, Yemen, Sudan, Canada

Scale Inhibitor 4300 High Polymer
:
Packing Size:
220.00 Kg.Liq
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Disc Separator Cleaner HD

Product Description | Product Application | Product Notes| Product DOSE
It is a heavy duty liquid blend of organic compounds with concentrated emulsifying agents. RXSOL-16-1046-020  is a liquid blend of organic solvent with heavy duty & concentrated emulsifying agents [+] Read More...
Code:
RXSOL-16-1046-020
Other Equivalent Brand

Separator Disc Cleaner, SI-314, Disc Separator Cleaner HD 30 Kg Liquid

Short Description:
Heavy duty liquid blend of organic compounds with concentrated emulsifying agents. RXSOL-16-1046-020 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying agents . An extremely effective for removal of burnt grease , carbon depo
Generic Name:
Purifiers filters Disc cleaner
Did you Know?
Add to Compare
|
Compare Now
Video not available
Disc Separator Cleaner HD
Application:
It is effectively removes tenacious Carbon deposits, Burnt grease, Oily residues and lacquers from Disc / Disc stacks of centrifugal separators , Extremely effective for removal of found in fuel oil a [+] Read More...
Using Procedure:
Should be diluted ,at the rate of 1-parts RXSOL-16-1046-020  to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend on nature of dirt / contamination  RXSOL-16-1046-020  may be use [+] Read More...
Note:
Mechanical cleaning  (Scrubbing and Brushing ) damages the discs which results in poor performance 
Technical Specifications:

Remarks:

Pl. refer below our various grade of cleaner : 

GP DEGREASER

General Purpose Emulsifier Cleaner 

A general oil and grease remover for deck and engine room. Most suitable for removal of oil and grease from machinery parts, tank tops, bulkheads, decks and floor plates, and especially for Tank cleaning. It is also used for cleaning of cargo tanks, bunker tanks and for spot cleaning.

HAND CLEANER

Removes Heavy Industrial Soiling

Powerful hand cleaner for removing heavy industrial soiling. Solvent-free formula. Rapidly emulsifies with all types of soil to ensure effective cleaning. Cleans and moisturizes the hands and prevents skin irritation. Have a pleasant fresh fragrance. Available in pumps, dispensers and wall bucket lids.


TANK CLEAN ALKALINE EXTRA

Alkaline cleaner/Pet Coke cleaner


Used for removing hardened oxidized oil and grease deposits and for cleaning pet coke, boiler furnace, etc. It is also used as a final treatment for cleaning tanks from black to white or grain and is safe on epoxy and polyurethane tank coatings. 


QUICK SPLIT CLEANER

Separating Tank and General Cleaner


A heavy-duty tank and bilge cleaner. It is used for cleaning and gas freeing of mineral oil tanks and for cleaning of tanks upgrading from black to white or grain. It can also be used as a general cleaner in the engine room and especially for cleaning bilges. It’s suitable for removal of most mineral oils, fats, and grease.

ELECTRO CLEAN CF

Non-Conductive Electric Cleaner


Used as a special de-greasing agent for removal of oil & grease from electrical components, machine parts, ball bearings, etc. It is odorless and evaporates without leaving residue. It does not contain chlorinated hydrocarbons or harmful chemicals and does not emulsify in water. It has a high flash point.

 

MULTI CLEANER

Biodegradable Cleaner


A superior liquid detergent with good foaming properties. The active wetting agents give rapid penetration to remove light oil and dirt from all surfaces. It is used in the galley, accommodation and engine room aboard ships, launches and maintenance department of all industries. Also used for cleaning reefer boxes, woodwork and decks.

RUST REMOVER

Rust Cleaner


An excellent tank cleaner for removing oxides, chlorides, nitrates, amides, amines, and other salts. Useful for cleaning the white powders appearing after loading vegetables and fatty acid oil additives. It also removes lime deposits that can occur after hot seawater washing. It cleans and brightens metals and forms a protective coating on treated surfaces. It’s biodegradable and non-flammable.

AIR COOLER CLEANER


A liquid cleaner containing solvents and surface-active agents for on-line and off-line cleaning of charge air coolers. It has been developed for safe, fast and economical in-service cleaning of the air handling systems of turbo charged diesel engines. By using ACC, airborne contaminants that have been carried into and deposited on scavenger air trunks, air coolers and inlet valves are removed. 

CARBON REMOVER NC

Solvent Emulsifier

Used undiluted for breaking down and separating residual combustion products and by-products of distillation of mineral oils. It’s suitable for cleaning burner tips, lube/fuel oil filters, oil coolers, fuel injectors and machines parts. It quickly dissolves deposits containing carbon, resins or varnishes and eliminates the need for hand scraping.

DESCALER POWDER

Heavy duty liquid blend of organic compounds with concentrated emulsifying agents. RXSOL-16-1046-020 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying agents . An extremely effective for removal of burnt grease , carbon deposits

#FILTERcleaner_manufacturer
#DISCcleaner_manufacturerSUPPLIER
#SEPARATOR_cleaner
Disc Separator claaner is effectively removes tenacious Carbon deposits, Burnt grease, Oily residues and lacquers from Disc / Disc stacks of centrifugal separators , Extremely effective for removal of found in fuel oil and Lube oil purifiers, Filters, Separators.

Separator Disc Cleaner, SI-314

Disc Separator Cleaner HD 25 Ltrs manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Disc Separator Cleaner HD 25 Ltrs at a competitive price from us. We have ready stock of Disc Separator Cleaner HD 25 Ltrs in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

34029019

Disc Separator Cleaner HD
:
Packing Size:
30.00 Ltr.
Available Packing Size:
Disc Separator Cleaner is available in 25 Ltrs packing as well as in 50 Ltr packing.
Article News:
Cleaning and Degreasing agent,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Multi Purpose Degreaser

Product Description | Product Application | Product Notes| Product DOSE
Code:
RXSOL-10-8674-025
Other Equivalent Brand

Rydall MP

Short Description:
Heavy duty industrial Multi Purpose cleaner for use on floors, walls, carpets, hard surfaces, porous surfaces and many other professional and disaster restoration applications. A highly concentrated can be use as multi purpose.
Generic Name:
Multi Purpose Cleaner
Active Matter:
72-81
Add to Compare
|
Compare Now
Video not available
Multi Purpose Degreaser
Application:
Renovate Industrial Multi Purpose Cleaner is a solvent-free, heavy duty restoration cleaner for the removal of dry soot, carbon, fire residues, filtration soils RXSOL MP multi-purpose degreaser  Indu [+] Read More...
Using Procedure:
Normal soil: Dilute 10 to 20ml A217 per litre of warm water (1:100 to 1:50). Heavy soil and restoration: Dilute 50ml per litre of warm water (1:20). Ceiling cleaning: Add 50ml "Safe Bleach OxiBrite" ( ww [+] Read More...
Note:
RXSOL MP multi-purpose degreaser  Industrial Cleaner  is food-grade  as a safe general cleaner (A1) for food processing facilities!   RXSOL MP multi-purpose degreaser  Industrial Cleaner  is a water-so [+] Read More...
Technical Specifications:
Remarks:

HANDLING AND SAFETY IRRITANT:
Irritating to eyes.For professional and industrial use only.Keep out of the reach of children.Avoid contact with skin and eyes.In case of contact with eyes rinse immediately with plenty of water and seek medical advice.Wear suitable gloves.Please consult the Safety Data Sheet before using this product.This product is intended for professional use only. The information given is intended to be of assistance to users but is without guarantee. Variations can occur in application and users are advised to conduct their own tests. Suggestions for use neither give nor imply any guarantee as to the intended use.

HOW TO USE RXSOL MP multi-purpose degreaser  Industrial Cleaner
Liberally spray on virtually any water washable surface and let sit for 20-30 seconds. Wipe clean and rinse with water. For stubborn stains, repeat the procedure. It is as safe and as simple as that! The reason for the short wait time is because the RXSOL MP multi-purpose degreaser  Industrial Cleaner is a highly effective oil and fat remover that is able to crawl under the residues on machines and equipment. This Multi-Purpose degreaser/cleaner includes specially modified additives for improved oil holding capacity, low foam, and maximum surface wetting. When sprayed on the equipment, RXSOL MP multi-purpose degreaser  Industrial Cleaner starts to soak around and underneath the oily accumulations, lifting them from the surface allowing the deposits to be wiped and/or rinsed away!

Multi Purpose Renovate Industrial Cleaner manufacturer and supplier in Navi Mumbai, Kakinada, Gandhidham, Surat, Chennai, Visakhpatnam, Andhra Pradesh, Kolkata, Chennai, Fujairah, Sharajha, Dubai, Abudhabi, Ajman, UAE Gulf, Ruwi Barka Sohar, Muscat Oman, Nairobi Kenya, Sudan, Yemen, Canada

Multi Purpose Degreaser
:
Packing Size:
25.00 Ltr.
Available Packing Size:
Multi-Purpose Renovate Industrial Cleaner available in 5, 25, 50, 210 Ltr Drum packing.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : rxmarinechemical@gmail.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarinechemical@gmail.com ( This mail is for supplier only )

 

 

Syndicate content