Drilling Fluids & Mud Oil Field chemicals-81

GAS TURBINE Cleaner GTC 1000

Product Description | Product Application | Product Notes| Product DOSE
RXSOL GTC 1000 GAS TURBINE CLEANER is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compre [+] Read More...
Code:
RXSOL-25-1927-220
Other Equivalent Brand

Clean Blade GTC 1000, Compressor Washing Chemicals GAS TURBINE CLEANER

Short Description:
RXSOL GTC 1000 is a concentrated, neutral, environmentally friendly, biodegradable, waterbased detergent cleaning fluid for cleaning and corrosion inhibition of gas turbine compressors.
Generic Name:
Liquid Detergent for Gas Turbine Compressor Cleaning for GE Aircraft
Active Matter:
98 - 99%
Add to Compare
|
Compare Now
Video not available
GAS TURBINE Cleaner GTC 1000
Application:
Gas Turbine Compressor Cleaning.
Using Procedure:
By spray ring or lance in either starter-driver (off-line) or fired (on-line) wash as directed by the engine manufacturers, in the quantities recommended in the engine manual. It is essential during hot was [+] Read More...
Note:
Appearance Clear pale straw coloured liquid with a mild pleasant odour. Solubility Completely soluble in water. No agitation required. Compatibility Not corrosive or detrimental to any of the materi [+] Read More...
Technical Specifications:
 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 

pH

:

7.5 - 8.5

Specific gravity

:

1.01

Total alkali metals

:

<0.5ppm after dilution

Ash

:

<0.01%

Aromatic compounds

:

None

Alkyl phenol ethoxylates

:

None

Halogens (measured as total Chlorine)

:

<10 ppm for concentrate

 
Remarks:




RXSOL GTC 1000 GAS TURBINE CLEANER Fluid exporter and supplier in Mumbai, Dubai, Kandla, Chennai, Muscat, Visakhapatnam, Kolkata, Fujairah, Sharjah, Abu Dhabi, Muscat Barka Ruwi, Oman, Nairobi Kenya Africa, Sudan, Yemen


GAS TURBINE Cleaner GTC 1000
:
Packing Size:
220.00 Kg.Liq
Available Packing Size:
RXSOL GTC 1000 Liquid Detergent for Gas Turbine Compressor Cleaning for GE Aircraft 25, 50, 210 Ltrs. Clear pale straw-colored liquid with a mild pleasant odor. Readily available stock in Kolkata, Mumbai, Kandla - Gandhidham, Surat, Chennai - Ennore, Visakhapatnam, Fujairah - Dubai.
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Polyethylene Glycol 400 PEG 400

Product Description | Product Application | Product Notes| Product DOSE
Polyethylene glycol 400 (PEG 400) is a low-molecular-weight grade of polyethylene glycol. It is very hydrophilic, which renders it a useful ingredient in drug formulations to augment the solubility and bioavailability of weakly water-soluble drugs.
Code:
RXSOL-81-8123-220
Other Equivalent Brand

PEG 400, Polyglycol, Polyethylene oxide, Polyoxy ethylene, PEG 400 PEG, poly oxyethylene, Poly Ethylene Oxide 20 Kg

Short Description:
PEG 400 is used as suitable auxiliary factor in paper, leather and coating industries. This chemical is also used as flocculent, cement suspension factor and as emulsifier in different industries.
Generic Name:

PEG 400

Add to Compare
|
Compare Now
Video not available
Polyethylene Glycol 400 PEG 400
Application:
This chemical is used as suitable auxiliary factor in paper, leather and coating industries. This chemical is also used as flocculent, cement suspension factor and as emulsifier in different industries.
Using Procedure:
Synonoms : Polyglycol, Polyethylene oxide, Polyoxy ethylene, PEG 400 PEG, poly(oxyethylene), poly(ethylene oxide)
Technical Specifications:
Polyethylene Glycol 400 PEG 400 Properties
Appearance (Clarity) Clear
Appearance (Colour) Colourless
Appearance (Form) Viscous liquid
Density (g/ml) @ 20°C 1.120 - 1.126g/ml
Viscosity (20°C) ~ 120 mPa
Average Molecular weight 380 -420
Acidity (CH3COOH) max. 0.05%
Boiling point >200 degree C
Flash Point  138.6 degree C
pH Value 5-7
Purity 99
EC No 500-038-2
CAS No  25322-68-3
Remarks:

PEG 400 HSN Code : 34042000
Storage : Room Temperature
Shelf Life : 60 Months

Industrial grade Polyethylene Glycol 400 PEG 400 is accessible in liquid form.  Its purity is more than 99%. Its viscosity is 90.0 cSt at 25 degree C temperature. Density of this chemical is 1.12 g/cm.cu. Melting point and boiling point of this chemical are 5 degree C and more than 200 degree C respectively. Its molar mass is between 360  to 440. Hydroxyl value of this chemical ranges between 255 to 311. PH value of this chemical is between 5.0 to 7.0.

This chemical is used as suitable auxiliary factor in paper, leather and coating industries. This chemical is also used as flocculent, cement suspension factor and as emulsifier in different industries.

Polyethylene Glycol 4000 (PEG 4000) manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Polyethylene Glycol 4000 (PEG 4000) at a competitive price from us. We have ready stock of Polyethylene Glycol 4000 (PEG 4000) in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Polyethylene Glycol 400 PEG 400
:
Packing Size:
20.00 Kg.Liq
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Polyethylene Glycol 400 (PEG 400)

Product Description | Product Application | Product Notes| Product DOSE
Polyethylene glycol 400 (PEG 400) is a low-molecular-weight grade of polyethylene glycol. It is very hydrophilic, which renders it a useful ingredient in drug formulations to augment the solubility and bioavailability of weakly water-soluble drugs.
Code:
RXSOL-81-8123-025
Other Equivalent Brand

PEG 400, Polyglycol, Polyethylene oxide, Polyoxy ethylene, PEG 400 PEG, poly oxyethylene, Poly Ethylene Oxide 25 Kg Liquid

Short Description:
PEG 400 is used as suitable auxiliary factor in paper, leather and coating industries. This chemical is also used as flocculent, cement suspension factor and as emulsifier in different industries.
Generic Name:

PEG400

Add to Compare
|
Compare Now
Video not available
Polyethylene Glycol 400 (PEG 400)
Using Procedure:
Synonoms : Polyglycol, Polyethylene oxide, Polyoxy ethylene, PEG 400 PEG, poly(oxyethylene), poly(ethylene oxide)
Note:
Industrial grade Polyethylene Glycol 400 PEG 400 is accessible in liquid form.  Its purity is more than 99%. Its viscosity is 90.0 cSt at 25 degree C temperature. Density of this chemical is 1.12 g/cm.c [+] Read More...
Technical Specifications:
Polyethylene Glycol 400 PEG 400 Properties
Appearance (Clarity) Clear
Appearance (Colour) Colourless
Appearance (Form) Viscous liquid
Density (g/ml) @ 20°C 1.120 - 1.126g/ml
Viscosity (20°C) ~ 120 mPa
Average Molecular weight 380 -420
Acidity (CH3COOH) max. 0.05%
Boiling point >200 degree C
Flash Point  138.6 degree C
pH Value 5-7
Purity 99
EC No 500-038-2
CAS No  25322-68-3
Remarks:

PEG 400 HSN Code : 34042000
Storage : Room Temperature
Shelf Life : 60 Months

Polyethylene Glycol 400 (PEG 400)
:
Packing Size:
25.00 Kg
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Polyethylene Glycol 400 PEG 400

Product Description | Product Application | Product Notes| Product DOSE
Polyethylene glycol 400 (PEG 400) is a low-molecular-weight grade of polyethylene glycol. It is very hydrophilic, which renders it a useful ingredient in drug formulations to augment the solubility and bioavailability of weakly water-soluble drugs.
Code:
RXSOL-81-8123-005
Other Equivalent Brand

PEG 400, Polyglycol, Polyethylene oxide, Polyoxy ethylene, PEG 400 PEG, poly oxyethylene, Poly Ethylene Oxide 5 Kg

Short Description:
PEG 400 is used as suitable auxiliary factor in paper, leather and coating industries. This chemical is also used as flocculent, cement suspension factor and as emulsifier in different industries.
Generic Name:
PEG 400 GLYCOL
Add to Compare
|
Compare Now
Video not available
Polyethylene Glycol 400 PEG 400
Application:
This chemical PEG 400 is used as suitable auxiliary factor in paper, leather and coating industries. This chemical is also used as flocculent, cement suspension factor and as emulsifier in different industries.
Using Procedure:
Synonoms : Polyglycol, Polyethylene oxide, Polyoxy ethylene, PEG 400 PEG, poly(oxyethylene), poly(ethylene oxide)
Note:
Technical Specifications:
Polyethylene Glycol 400 PEG 400 Properties
Appearance (Clarity) Clear
Appearance (Colour) Colourless
Appearance (Form) Viscous liquid
Density (g/ml) @ 20°C 1.120 - 1.126g/ml
Viscosity (20°C) ~ 120 mPa
Average Molecular weight 380 -420
Acidity (CH3COOH) max. 0.05%
Boiling point >200 degree C
Flash Point  138.6 degree C
pH Value 5-7
Purity 99
EC No 500-038-2
CAS No  25322-68-3
Remarks:

PEG 400 HSN Code : 34042000
Storage : Room Temperature
Shelf Life : 60 Months

Industrial grade Polyethylene Glycol 400 PEG 400 is accessible in liquid form.  Its purity is more than 99%. Its viscosity is 90.0 cSt at 25 degree C temperature. Density of this chemical is 1.12 g/cm.cu. Melting point and boiling point of this chemical are 5 degree C and more than 200 degree C respectively. Its molar mass is between 360  to 440. Hydroxyl value of this chemical ranges between 255 to 311. PH value of this chemical is between 5.0 to 7.0.

This chemical is used as suitable auxiliary factor in paper, leather and coating industries. This chemical is also used as flocculent, cement suspension factor and as emulsifier in different industries.

Polyethylene Glycol 400 (PEG 400) manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Polyethylene Glycol 400 (PEG 400) at a competitive price from us. We have ready stock of Polyethylene Glycol 400 (PEG 400) in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Polyethylene Glycol 400 PEG 400
:
Packing Size:
5.00 Ltr.
Available Packing Size:
210 Kgs
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

ALKALINE HD coal remover

Product Description | Product Application | Product Notes| Product DOSE
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. [+] Read More...
Code:
RXSOL-22-3018-220
Other Equivalent Brand

Rock Phospate Cleaner, PETCOKE looser, COAL REMOVER RX Hold 220 Ltr

Short Description:
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.
Generic Name:
Ship Cargo Coal cleaning chemicals
Active Matter:
54 - 63
Add to Compare
|
Compare Now
Video not available
ALKALINE HD coal remover
Application:
• Use cold - No Heating required. • Easily dissolves deposits containing carbon , polymer resin etc. • Economical to use. • Scraping not required. • Non- flammable. • Helpful for burner tips, fu [+] Read More...
Using Procedure:
Directions for Use and Dose Rates Soak Method:- It may be used concentrated or diluted with water, depending on the degree of contamination, the surface area to be treated, the desired degree of cleaning [+] Read More...
Note:
COAL REMOVER manufacturer and supplier in India / Turkey / Middle East. We havs stock point in Mumbai, JNPT, Surat, Hazira, Mundra, Kandla, sikka, Goa, Manglore, Visakhapatnam, Kamraj Port, Ennore, Chennai [+] Read More...
Technical Specifications:

   **Read the Material Safety Data Sheet before using this product.**

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020,  Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210
 
 
Slip Barrier Coat RXSOL HOLD BLOCK  ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050
 
BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210
 
COAL REMOVER rx hold  ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050
 
 
Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050
 
 
Rock Phosphate Cleaner rx hold  ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210
 
PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains.  Part No.- RXSOL-22-2208-210
 
HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful\ stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025
Remarks:

Safety And Handling :-

“RXSOL-22-2201” is completely safe to handle, being non-toxic & non corrosive.As with all chemicals general safety and handling procedures apply. Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.

Ship Hold Coal cleaning chemicals typical video Link.  We are one of largest coal cleaning chemicals - detergent manufacturer and supplier in India and Middle East.

This product is most popular for Ship Hold cleaning detergent for coal cleaning. Shipchandler Shipping Agent can get good discounts directly from our factory by providing there registered accounts number. 

#CoaLremover_Mumbai
#CoaLremover_MundraKANDLA
#CoaLremover_Visakhaptnam
#CoaLremover_FujairahMuscat
#AlkalineCleaner
#ShipHoldCleaner_Alkaline

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit.  Also help to remove stains and discolouring after discharge of coal cargoes. 

Cost effective SOLUTION for cleaning aſter coal residues,  specific ore residues.
 
Recommended to use spray equipment also can be apply by hand spray method.
The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER. 
 
Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent  / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent  / holdbrite with 5 ltr water. Then Mix (A) and (B)  to spray on coal deposited and stain area. 
 
Other valuable product - 
For RUST REMOVING use RXSOL-16-1088-025  And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.
STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH

Coal Remover - Powerful ship hold cleaning detergent manufacturer and supplier in Navlakhi Port, Hazira, Sikka, Jamnagara, Kandla, Mumbai, Manglore, Goa, Chenna Ennore, Visakhapatnam Vizag Gangavaram, Kolkata Haldia, Paradip, Manglore, Fujairah, Abudhani, Ajman, Sharjah, Barka, Muscat Oman, Canada, Kenya Nairobi Mombasa

High quality product classified as a general cleaner/ remover of coal residues from cargo. COAL REMOVER helps to loosen coal deposit.  Also help to remove stains and discolouring after discharge of coal cargoes. 

Cost effective SOLUTION for cleaning aſter coal residues,  specific ore residues.
 
Recommended to use spray equipment also can be apply by hand spray method.
The use of HOT WATER will enhance the cleaning effectiveness of COAL REMOVER. 
 
Blend mixture of Diluted COAL REMOVER and Diluted Alkaline high foam ship hold cleaning detergent  / Holdbrite XF, to enhance detergency and cleaning effect.
One part ( A ) of Mixture can be made 1 Ltr Coal Remover with 5 Ltr water, while Other part ( B ) of mixture can be made 1 ltr alkaline detergent like Alkaline high foam ship hold cleaning detergent  / holdbrite with 5 ltr water. Then Mix (A) and (B)  to spray on coal deposited and stain area. 
 
Other valuable product - 
For RUST REMOVING use RXSOL-16-1088-025  And for Cleaning of Lime use RXSOL-67-2213-060, And Cement remover RXSOL-22-2202-025

Precaution : Hand Gloves, Google, Chemical protective Suit.
STOCK POINT - MUMBAI, KANDLA, MUNDRA, KOLKATA, HALDIA, VIZAG, GANGAVARAM, CHENNAI, ENNORE, FUJAIRAH
ALKALINE HD coal remover
:
Packing Size:
220.00 Kg.Liq
Available Packing Size:
5 ltr., 10 ltr., 20 ltr., 25 ltr., 35 ltr, 50, 210 ltr. available at all major ports of India and Middle east.
Article News:
SHIP CARGO HOLD CLEANING DETERGENT supplier in India UAE Oman,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

2-Acrylamido 2-methylpropanesulfonic Acid ATBS

Product Description | Product Application | Product Notes| Product DOSE
2-Acrylamido 2-methylpropanesulfonic acid. It is present in white colored powder or flakes. Used in polymerization where high molecular weight polymers (greater than two million) are desired.
Code:
RXSOL-81-8186-025
Other Equivalent Brand
Short Description:
Sodium Salt of 2-Acrylamido 2-methypropanesulfonic Acid (50% Aqueous Solution) also known as NaATBS CAS No. 5165-97-9
Add to Compare
|
Compare Now
Video not available
2-Acrylamido 2-methylpropanesulfonic Acid ATBS
Application:
AMPS is a very strong ionic group and ionizes completely in aqueous solutions. In applications where the precipitation of mineral salts is undesirable, the incorporation of a polymer containing even a small quantity of AMPS can significantly inhibit the precipitation of divalent cations.
Using Procedure:
Note:
    PARAMETERS   SPECIFICATIONS Appearance Non-Volatile Matter Moisture Col [+] Read More...
Technical Specifications:

OTHER PRODUCTS

 

Sodium Salt of 2-Acrylamido 2-methypropanesulfonic Acid (50% Aqueous Solution) also known as NaATBS CAS No. 5165-97-9

 

PARAMETERS 

 

SPECIFICATIONS

Appearance

Water,Weight Percentage

Density @ 25 C (77 F)

Viscosity @ 25 C (77 F)

pH @ 25 C (77 F)

Colour APHA @ 25 C (77 F)

Iron

Inhibitor (MMEHQ)

 

Clear Colourless To Loght Yellow Liquid

48-52

1.20 - 1.21 Kg / Litre

14.0 cPs Max.

8.3 Min.

90 Max.

2 ppm Max.

65-90 ppm

 

Water Treatment Chemicals

a) Dispersants (Low molecular Weight): Co-Polymer and terpolymers of 2-Arcylamido 2-methylpropanesulfonic Acid are used in Cooling Tower and Boilers to inhibit Calcium, Magnesium and Silica scale.

b) Flocculants (High Molecular Weight): High Molecular Weight Co-polymer of 2-Arcylamido 2-methylpropanesulfonic Acid is used to percipitate solids in industrial and mining effluents.

 

Emulsions For Paints and Paper Coatings

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid improve scrub resistance, dispersant performance and reduce grit formation.

 

Adhesives

a) Pressure Sensitive Adhesives : Ploymers containing 2-Arcylamido 2-methylpropanesulfonic Acid are used to improve tack and peel strength in Pressure Sensitive Adhesive fromulations.

b) Wood Glue : ploymers containing 2-Arcylamido 2-methylpropanesulfonic Acid improve adhesive strength, thermal and mechanical properties with superior rheology.

 

Hydrogels and Super absorbants

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid are used in diapers, lotions and other personal care products, due to high water absorbing capacity, electrical conductivity, slipperiness and lubricity. Being super absorbants, ploymers also finds applications in the agriculture sector as water retention agents.

 

Textiler Auxillaries

Ploymers containing 2-Arcylamido 2-methylpropanesulfonic Acid are widely used as Textile Sizing Agents, Thickeners, Dispersants and Non-Woven Emulsion Binders.

 

Detergents and Cleaners

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid improve charachteristic of hydrophilicity, dispersibility, and lubricity and also enhance the cleaning efficiency of Detergents and Cleaners

 

Oilfield and Mining Chemicals

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid provide excellent high temperature stability, lubricity and friction reduction in drilling and cementing fluids.

 

Construction Chemicals / Super Plasticizers

Polymers containing 2-Arcylamido 2-methylpropanesulfonic Acid improve dispersability, lubricity and can be used as excellent flow control auxillaries for building materials.

 

Acrylic Fibre

Used as co-monomer in acrylic fiber industry to enhance dye receptibility.

2-Acrylamido 2-methylpropanesulfonic Acid ATBS manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of 2-Acrylamido 2-methylpropanesulfonic Acid ATBS at a competitive price from us. We have ready stock of 2-Acrylamido 2-methylpropanesulfonic Acid ATBS in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

2-Acrylamido 2-methylpropanesulfonic Acid ATBS
:
Packing Size:
25.00 Kg
Article News:
,
HASHTAG:
#MarineChemical #TankCleaner #OilFieldChemical #ChemicalManufacturer #ChemicalSupplier #WaterTreatmentChemical #ROchemicals #ReverseOsmosisChemical #Dispersant
#Demulsifier #WaterlessHandCleaner #AirCoolerCleaner #CarbonRemover #ScaleRemover #ActivatedAlumina #ActivatedCarbon #SilicaGel #Degreaser_Biodegradable
#DieselExhaustFluid #BlueLiquid #ToiletBlueWater_Juice #RigWash #OxygenScavenger #CoolingWaterTreatment #RoccorNB #CorrosionInhibitor #CalciumChloride #DIwater
#AlumPowder #MagnesiumSulphate #SodaAsh #SulfamicAcid #PotassiumChloride

Ammonium PolySULPHIDE Solution

Product Description | Product Application | Product Notes| Product DOSE
Ammonium Polysulfide is a cleaer Yellow to Red Liquid with a rooten Egg or Ammonia Like Odor. It is used as an analytical Reagent and an insecticide.
Code:
RXSOL-81-1531-220
Other Equivalent Brand

AmmoniumPolysulfide, Ammonium Sulfide, Ammoniumtrisulfide, AMMONIUM POLYSULFIDE Ammoniun Polysulfide, Diammonium trisulphide; Ammoniun Polysulfide 22%; AmmoniumSulphideSolution40%; Ammoniumsulfide((nh4)2(s3)); AMMONIUM SULPHIDE SOLUTION

Short Description:
Ammonium PolySULPHIDE Solution
Add to Compare
|
Compare Now
Video not available
Ammonium PolySULPHIDE Solution
Application:
Ammonium Polysulfide Clear, yellowish liquid. Kept basic with NaOH, as acid will release hydrogen sulfide gas. Technical grade is 40-44%. Used in photography, textiles, synthetic flavors, coloring brasses, bronzes, and iron control
Using Procedure:
Note:
Technical Specifications:
Liquid Ammonium Polysulfide
 
Physical State Liquid
Formula H8N2S3
Molecular Weight 132.258 g/mol
Ammonium PolySULPHIDE Solution
:
Packing Size:
225.00 Kg.Liq
Article News:
,

RX MARINE INTERNATIONAL is most popular chemicals source in INDIA, Keeping ready stock at 5 LOCATION which includes Mumbai, Kandla - Gandhidham, Vizag - Visakhapatnam, Ennore - Chennai, Kolkata more then 3000 types of chemicals. Please click here to get PRODUCT Categories details http://rxmarine.com/Products

 

Mail Us for any PRODUCT related information and purchase inquiry : rxmarinechemical@gmail.com ( This mail is for customer / Buyer only ) And if you wants to add your hand as a supplier, And if you have volume manufacturing capacity of chemicals, pl. drop your mail at rxmarinechemical@gmail.com ( This mail is for supplier only )

 

 

Syndicate content