RIGS Oil Field-34

Seawater Hydrometer supplier in Dubai, Sharjah, AbuDhabi, Ajman, Fujairah UAE Middle East, Muscat Oman, Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Haldia, Howrah.

 INSTRUCTIONS FOR USE
1. A clean, representative sample of the supporting water should be obtained by means of a sampling can or other suitably designed sampling apparatus. A sample of at least 1 liter will help to ensure that the temperature and density do not change unduly between the collection of the sample and taking of the readings. The depth of water in the container must be sufficient to allow at least 25mm clearance between the bottom of the hydrometer and the bottom of the hydrometer and the bottom of the container. The internal diameter of the container or jar should be at least 50 mm.
2. The number of samples to be taken, also at which depths and at which positions outside the vessel they should be taken, may be important according to the circumstances.
3. Readings may be taken by lowering the hydrometer into a suitably shaped sampling apparatus or by transferring the water to a suitable glass test jar. If a metal or other non-transparent container is used for taking readings, ensure that it is full to the brim. If a glass test jar is used, it should preferably be rinsed first, so as to avoid undue temperature changes. The container or test jar should be shielded from draughts, which may affect the readings.
4. The reading must be taken in the sampling apparatus or glass test jar as rapidly as possible Undue delay in taking the reading could result in temperature changes leading to inaccurate results. In case of doubt, a repeat sample should be taken in order to verify the first observation
5. Ensure that the stem of the hydrometer and the surface of the water sample is free from grease and oil since the accuracy of the readings could be adversely affected
6. Hold the hydrometer vertically by the top of the stem and gently lower it into the water sample until it floats freely
7. Take the hydrometer reading where the level liquid surface meets the graduated scale.

CORRECTIONS TO HYDROMETER READING
1. For ydrometer the appropriate corrections should be applied.
2. For most Draft Survey purposes, no further corrections to the readings are needed.
Reading is most correct when the glass hydrometer is used at a temperature of 15°C. If immersed in water at temperatures higher or lower than 15°C, the instrument will expand or contract so that, for precise laboratory work, a small correction would be applicable However, for Draft Survey work, it should be noted that the ship itself will normally expand or contract according to the temperature of the water in which it is rating. The corrections required to compensate for these changes in volume are of opposite signs and tend to compensate for each other. As it is not practicable to calculate any temperature corrections for the ship, for most Draft Survey purposes no correction should be applied for the expansion or contraction of the hydrometer glass

Hydrometer Density supplier in India UAE Middle East Gulf Muscat Oman Nairobi Kenya.

Feric Chloride contains chlorine, so its characteristic smell is chlorine like hydrochloric acid odor. Due to presence of chlorine Ferric Chloride is Highly corrosive to most metals. 

Specification-
Ferric Chloride CAS NO.7705-08-0
SYSTEMATIC NAME :Ferric chloride
OTHER NAME :Iron(III) chloride, Iron tri chloride, Ferric trichloridde Anhydrous
EMPIRICAL FORMULA :FeCl3
MOLECULAR WT :162.2 g/mol
APPEARANCE :Dark greenish Black, Crystalline Powder extremely hygroscopic
SPECIFICATION :Ferric Chloride (as Fecl3) : 98.00 % min
Matter Insoluble in water :0.50 % max
Free Chlorine (as Cl) :0.01 % max
Ferrous Salts (as Fecls2) :0.10 % max
Sulphates (as SO4) :0.30 % max
Nitrates (as NO3) :0.05 % max
Zinc ( as Zn) :0.01 % max
Arsenic (as As203) :0.0005 % max
Alkalis and Alkaline earths :0.30 % max

Ferric Chloride is Noncombustible materials so esy to transport and storage.

Ferric chloride (FeCl3) makes water clean and clear.

FERRIC CHLORIDE ANHYDROUS manufacturer, exporter and supplier in Muscat - Oman, Fujairah UAE, Mumbai, Surat, Gandhidham, Chennai, Visakhapatnam, Kolkata, Dubai, Sharjah, AbuDhabi, Ajman, Navi Mumbai MIDC, Koparkhairna, Panvel, Taloja, Gujairat GIDC

Chlorinated Detergent manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Chlorinated Detergent at a competitive price from us. We have ready stock of Chlorinated Detergent in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Appearance                                                                     White free flowing crystalline powder

Density                                                                             1.98 SG

Bulk Density                                                                      71 to 78 Ib/ ft³

Aqueous Solubility                                                            Up to 24%, 278.9 gL of solution at 68˚F (20˚C)

Purity                                                                                 98.83%-99%

K20                                                                                    62% and above

Potassium Chloride finds numerous uses, especially in the field of Agriculture, Medicine, Radiation, food & beverages, and more. Another well-known use of this salt is as a fire extinguisher. 

We are major exporter of Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa

TSP is a strong base and can cause severe eye damage and can burn unprotected skin.

Wear suitable clothing and eye protection. Keep away from skin and out of gloves.

Any foliage near where TSP is to be used should be soaked with plain water prior to the application of TSP, and rinsed down afterward. Be sure to read and follow all warnings on the product's packaging.

TSP is a very strong cleaner at the dilutions normally used, which vary from 1/2 cup TSP to 2 gal. warm water for "heavy duty cleaning"  to 1 cup TSP to 3 quarts warm water for "ridiculously heavy duty cleaning"  (source The Savogran Company).  For mildew killing, household bleach is added to the TSP/water mixture.  The recommended ratio is 1 part household bleach to 4 parts water.

pH (Aqueous Solution): 10.0-10.5 (10g/lit)
Segregation Coefficient (Pow) : -2 log      
Decomposition (C) : Over 130
Freeze Point (C) : -5
Viscosity @20 C : 5-10 cps
Boiling Point :  100 C
Vapor Pressure @ 20 C : 20 hPA
Density @ 20 C : 1.1 g/cm3

Trisodium Phosphates is available in different forms and helps in softening the water and removes the soil content. Available in

Nutrient Solution TSP manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Nutrient Solution TSP at a competitive price from us. We have ready stock of Nutrient Solution TSP in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.