Perceptive features of Alkalinity Control product from RxMarine

As the name suggests, this is a solution that controls the alkalinity in boilers. This is basically used for maintaining the pH of a particular acidic solution. This alkalinity control liquid can be used in machines and equipments operating under low pressure and medium pressure and lastly it is also very much useful and suitable for the usage in high pressured systems generating more than 60-84 bar of pressure. Boiling waters or water containing solvents make a deposition of layer of calcium on the inside of the boilers and the alkalinity control liquid makes the coating of calcium a sludge, so that it is easily removed and cleaned. 

Some of the highlighting features of Alkalinity Control are this solution has a mechanism called the Alkalinity balance mechanism that controls the rusting and corrosion by keeping the pH level of the solvent inside the machine constant. Moreover, the hardness of the calcium is removed and is transformed into a slurry paste that is cleared easily. Since a boiler has to deal with many chemicals this alkalinity control is completely chemical proof, which is no matter what chemical is added, the result will never be futile. It is advisable that the alkalinity control must never be mixed with acid/fats. A concentrated fluid, this can be diluted as per requirement and used for protection against rust and corrosion.

The application is very much easy as the Alkalinity Control provides the relative alkaline control mechanism inside any machinery or boiler. However, without the correct prescription and measurements there would be excess of salt and that would restrict the machine or boiler to perform correctly. This would result in the restricted water flow, ineffective heat transfer, and also corrosion. Moreover, the Alkalinity Control (RXSOL-50-5002-025) controls the acidity of machines by neutralizing the acidic gases.

The main advantages of this Alkalinity Control are that it reduces the maintenance costs and overhead costs associated with it. It prolongs the life of the machinery as it inhibits corrosion and scale. It helps in maintaining a right amount of balance to control the alkalinity is done by mixing the solution into the boiler with the fluid inside. Moreover, it can be used as a neutralizer after any acid cleaning operations for any system.

The direction of using for the desired machinery part with the help of RXSOL Water Boiler Treatment Dosing unit that measure accurately the amount needed for the neutralization. This can also be done via the bypass pot feeder which is installed in the feeder line of the boiler/particular machinery part under consideration.

In any case of contamination with your eyes or skin or any other part, medical attention is mandatory and it should be taken care off as soon as possible. Moreover, if the contamination occurs with your eyes, wash the affected part with copious amounts of water for about 15 minutes then seeking medical attention. For Skin, washing off the contaminated area with clean water and remove contaminated clothing is recommended. If it gets inhaled, get fresh air and if breathing seems to be irregular it is best to seek help. It is very necessary to follow certain prescribed precautions.

Why to opt alkalinity control chemicals from Rx Marine?

Rx Marine has produced alkalinity control chemicals for the period of 20 years with great excellence that is employed in various forms of applications in industries. These products manufactured are basically non toxic as result they are less hazardous as compared to other chemical products available in the market. The excellent customer service of the Company is available 24x7 for helping. They are available for all queries to guide you through choosing the right product for your need and even follow up or are ready to hear your grievances even after the sales are over. The products come with proper handling instructions and are eco-friendly.

Click here for more details