Coil Cleaner – A concentrated formula for cleaning

Coil Cleaner (RXSOL-41-8672-025) is basically a cleaning agent employed for wide variety such as condenser coil cleaner, air conditioner coil foaming cleaner, evaporator coil cleaner etc. Be it any type of coil, the fastest way to clean and brighten commercial HVAC coils is to use an efficient coil cleaner. The concentrated formulation of the cleaner effectively foams and emulsifies stubborn smoke film, baked on lint, grass, leaves, insects, feathers and other dirt deposits from the coils. The foam created pushes deposit and contamination out of the coil and easily rinsed with water to get a clean and bright surface. The cleaner not only cleans contamination and removes oxidation but also restores efficiency and thus reduces operating cost.

The special formulation of the Coil Cleaner contains solvents and acids that are specifically blended to effectively clean and brighten aluminium air-cooled condenser coils. Since the formulation is concentrated, it is required in very less quantity and in dilution with water. The dilution not only makes the cleaner last longer but also increases the penetration power of the cleaner, thus providing great performance. The application ratios will vary according to the intended use though a general dilution ratio is as such - for light cleaning and brightening job, the cleaner needs to be mixed with water in the ratio of 1:8 whereas for cleaning of medium and difficult cleaning jobs, the dilution ratio of chemical to water has to be 1:5. To create a high foaming solution for cleaning of air-cooled condenser coil, the ratio of chemical to water has to be 1:1. The cleaner should not be used in higher concentration than the water. After the surface or the coil is treated, the surface needs to be washed with ample fresh water.

The cleaner can be sprayed with low pressure, acid resistant tank sprayers. The cleaner liquid or the mist should not be inhaled or allowed to get in contact with the skin. If accidental contact occurs, it can burn the skin and eyes.  Accidental ingestion of the chemical can cause severe gastric distress and may prove fatal. Inhalation of vapours may result in respiratory tract irritation. The cleaner has a heavy foaming action due to its solvent-acid blend. The cleaner is intended for professional use only. It can prove fatal at full strength.

The product should always be used in dilution. Before application, the coils need to be cooled off completely. While mixing with water, the desired amount of water need to be placed in a tan and then the chemical needs to be added. It is recommended to dilute in larger parts of water and increase the concentration as required. The product needs to be applied properly and kept for 5-10 mins. The cleaner should not be allowed to dry on the surface. If foaming does not take place, the reason could be the paint or coating on the coil.  The coil and the surrounding area need to be washed thoroughly with ample water.

Click here for more details