Product Application

Concrete Floors:For heavy buildups first wet floor thoroughly. Sprinkle powder lightly all over area to be clean­ed. Scrub with shop broom, brush, buffer, or walk behind scrubber.  Rinse with water. For moderate to light soil add 2 to 4 ounces per gallon of water. Flood floors with this solution. Scrub with shop broom, brush, buffer, or walk behind scrubber. Rinse with water. Hot Tank Degreasing:Add 5 to. 20 pounds of powder per 100 gallons of water. Heat solution to 170°F minimum. Dip engines and parts for at least 10 minutes. Remove, rinse with water and air dry. For paint stripping double or triple concentration. NOTE: Do not dip aluminum parts. To prevent flash rust of ferrous materials, treat surfaces immediately with rust preventative or light oil. Steam Cleaning:Dissolve 1 pound of powder in 12 gallons of water. If steam cleaning unit has chemical premix tank, dissolve 2 pounds in 5 gallons of water and adjust dripolator or metering valve to deliver desired concentration. Steam surface thoroughly, rinse and air dry.

Pressure Washers: Dissolve 2 to 4 ounces per gallon of water. If unit has chemical premix tank, dissolve 1 pound in 5 gallons of water and adjust dripolator or metering valve to deliver desired concentration. Spray surfaces thoroughly and allow to stand for a few minutes to penetrate. Rinse and air dry.

Automatic Scrubbers: For large automatics to clean wood, block or concrete, add 5 pounds per 100 gallons of water. Laundry Detergent or Additive: Used as a detergent‑1 cup per standard 20‑25 pound load, 2 to 3 cups for 100 pound load. Used as an additive 1/4 t o 1/2 cup per standard load, 1 to 2 cups per 100 pound load.