Product Application

These are the primary applications and suggested mix ratios for KLIN KOT . The ratios can be varied up or down according to your results. You can visit us on the web to view and print instruction sheets that are specific to your application. If you have any questions regarding a particular application or mix ratio. 

Agricultural Equipment 8 to 1 - 10 to 1

Apply to keep mud and other debris from sticking to all farm equipment.

All Equipment 8 to 1

Use to inhibit rust and to keep equipment looking new. There is no build-up with KLIN KOT . Re-spray equipment after every wash.

Asphalt Equipment, Pavers & Trucks 8 to 1 - 11 to 1

Use KLIN KOT to keep asphalt from sticking to tools, equipment and trucks. Be sure to clean off all of the diesel, soap or other release agents before using KLIN KOT and remember to apply the product every time. It can also be used in the water tanks of rollers at 50 to 1. This will reduce the amount of water needed to prevent stickage and will also leave a coating on the drum allowing the operator to get off the pavement if the water should run out.

Boring and Tunneling Equipment 8 to 1 - 11 to 1

Use KLIN KOT to prevent mud and clay from sticking to conveyor belts, skid steer loaders, cranes, etc. At the end of the day, the mud and clay will clean right off of protected equipment. For the conveyor belts, a constant mist will keep it stick free and stop the hours of clean up at the end of the day.

Concrete Equipment 11 to 1

Spray all of your concrete finishing and placing equipment prior to every pour and clean up will be easy.