Product Dose

Directions for Use and Dose Rates: RXSOL-20-2002-020 is  specially formulated for cleaning double bottom, deep and wing tanks etc, used for fuel oils. It can also be used for local cleaning and degreasing of engine rooms and on deck.

Soak Method: for heavy soil put parts into undiluted RXSOL-20-2002-020, for general soiling use a solution of 10-30% RXSOL-20-2002-020 in water. Parts should be soaked for at least 30 minutes before washing off with water.

Spraying Method: Use neat RXSOL-20-2002-020 over all soiled areas. Allow 10-20 minutes for reaction , then rinse with high pressure water hose., Scrubbing will assist the cleaning operation  for stubborn deposits.

Rock and Roll Method: Recommended time to clean and gas-free under normal circumstances would be 3-6 days ,for cleaning of double bottom tanks at sea.

1.First of all  heat the remaining oil in tanks .
2.By stripping constantly. flush the tank with sea water,
3.Close  all suction and discharge valves .
4.1^stDose  Fill the tanks by ½ to 1 litre RXSOL-20-2002-020 per tone of water  through pipe or manhole, for 75-80% of capacity of tank to be cleaned.
5.Then fill tank to 25% capacity with sea water, raise the temperature up to 60°C maximum, and maintain this  temperature for 24 hours.
6.Top up tank to 75-80% capacity with sea water, continue to heat for 48 to 72 hours.
7.Discharge and strip tank. Fill to 50-60% capacity with sea water and allow 2 hours rinsing time.
8.Discharge tank and strip, flushing tank with sea water for 2 hours,stripping continuously. When completed, inspect tank to ascertain if second cleaning is required. If so:
9.For completion add second dose of RXSOL-20-2002-020, fill tank with sea water 75-80% capacity and raise the temperature to 60°C maximum. Maintain this for 48 to 72 hours. And recirculate the solution .
10.Discharge and strip tank, flush with sea water, stripping continuously for 2 hours.
11.To gas-free, fill tank with sea water to overflow through vents and sounding pipes, discharge and strip completely