Product Dose

Ready-To-Use:

Necessary concentration in water only 0,2 to 0,4 % Oil and Sludge remover

SLUDZA   is  also recommended for local cleaning & degreasing of engine rooms, bilges & tank  tops. It may be applied by brush, spray, immersion, soaking, or  any  other  conventional  means. SLUDZA is used  neat. Allow a residence time of at least 20- 45 minutes where  possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed  to separate  in a holding tank for atleast 3-5 hours before passing through an oily water separator.

1. Sweep or dust mop floors.

2. Properly position caution signs for wet floor conditions.

3. Mop floor or scrub using an auto scrubber or floor machine 

4. Pick up soiled solution with a wet vacuum or tightly wrung mop.

5. No rinsing required.

6. Allow floor to dry. Note: Floors may be slippery when wet.

7. Burnish or spray-buff immediately after cleaning (optional). 

 Special Features 

• Automatic dispensing eliminates measuring and mixing and ensures accurate dilutions.
• Will not dull or damage floor finishes.
• Clean, fresh scent.
• No rinsing is required, saving time and labor.