Product Dose

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
 

The Importance High-Pressure Cleaning

The job of high-pressure cleaning can be done easier & quicker by simply using ALKAATUFF High Foam CLEANER incorrect dosages. Using a high-pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1:  Spraying the  ALKAATuff High Foam CLEANER over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.

After the ALKAATuff High Foam CLEANER has been sprayed on the surface and before the wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the ALKAATUFF High Foam CLEANER thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of ALKAATuff High Foam CLEANER substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of ALKAATUFF High Foam CLEANER in correct dosages is half the job done.

General Cleaning :- ALKAATuff High Foam CLEANER can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low-pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If  the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on the degree of contamination ALKAATuff High Foam CLEANER should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of ALKAATUFF High Foam CLEANER to a bucket of water. The ALKAATuff High Foam CLEANER solution can be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the ALKAATuff High Foam CLEANER solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, ALKAATuff High Foam CLEANER is not recommended for washing machines. 

20-50 % with fresh water .             Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition                    Use Undiluted from to 20-50% diluted with water. 
Medium soil deposition                 10-20%  diluted with water. 
Light Soil ( general degreasing )   5-10% diluted with water.