Product Dose

Directions for Use and Dose Rates General Cleaning

The use of RXSOL-16-1501-035 for cleaning of utensils and other surface in correct dosages is half the job done. 3 Pieces of Good Advice .Apply RXSOL-16-1501-035 on dry surface where possible. A dry surface will absorb far better than a wet surface. When applying RXSOL-16-1501-035 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL-16-1501-035 may produce "channels" down the surface, thereby running too fast off the surface.
For cleaning hard surface by high pressure cleaning; It is important that the rinsing water does not run over non-cleaned surface. The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with optimum concentration of RXSOL-16-1501-035 will  give  the  best  effect on hard surface.

Dose :

FOR DISHES, GLASSWARE AND UTENSILS: Use 25-50 ml per sink full of water and permit water to run with force until sink is filled to usual level. Wash dishes, rinse and permit to air dry. It is not necessary to wipe as both dishes and glasses will dry to a spot free sparkle. Removes lipstick from glasses without effort. Will not affect head on beer. OR

RXSOL-16-1501-035 should be mixed with  water at a rate of 50-200 ml per 10 litres.i.e.1cup of RXSOL-16-1501-035 to a bucket of water. RXSOL-16-1501-035 solution can be applied simply by hand, automatic dish washer machine ,mops, brushes or rags, or by dipping the soiled articles into the RXSOL-16-1501-035  solution. After cleaning, rinse off with cold or warm water.