Radiator and AC coil cleaner-39

Property Value : Color Clear

FORMALIN - Formaldehyde is one of the most versatile chemicals and other industries to produce a virtually unlimited indispensable products used in daily life such as: amino resins and adhesives, phenolic resins, acetylic chemical, polyacetal resins, trimethylene diphenyl isocyanate (MDI), pentaerytriol, HMTA, para-formaldehyde, chelating agents, Tri-Methylol Ethane (TME), Pyridine chemicals, NPG (Neo Penthyle Glycol) and Nitro paraffin derivatives.


- A powerful general disinfectant
- A broad spectrum germicide
- Bactericidal and virucidal
- Very economical cost in use
- It has strong effects on IB, NB, FB viruses
- Used for wheel dipping
- Biological preservation
STORAGE: 
Store the original container in cool and dry place away from food and feeding stuff.

PACKING  : 25 , 50 & 210 Ltrs

PRECAUTIONS :  Wear suitable protective clothes during application of Formalin
- Keep away from heat and open flame
- Don’t discard the product residual or its empty containers in water bodies
- Keep away from the reach of children

Formalin manufacturer and supplier in Mumbai, Kolkata, Kandla - Gandhidham, Chennai, Visakhapatnam, Haldia, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, UAE - Middle East,  Barka - Muscat - Oman, CANADA BC, Sudan, Yemen, Nairobi Kenya

Dangerous goods class         : Non-hazardous
Physical state                         : Liquid
Odor                                       : No fragrance added
Color                                       : Pale Yellow
pH concentrate                       : N/A
Net weight                              : 7.92 lb/gal
Specific Gravity                      : 0.946
Molecular Weight                   : N/A
Solubility in water                   : Complete
Rinsibility                                : Excellent
Surfactants                             : Non-toxic

Flash point                                   : >150°F ASTM D93 closed cup
Boiling Point                                : 292°F
Vapor Pressure @ 68°F            : 0.9 mm Hg
Evaporation Rate                        : 0.0098
Volatile by volume                       : %       VOC's    0 grams per liter
Toxicity                                           : N/A
Biodegradable                             : Yes, begins at 28 days in soil or 7 days in water
Kauri-Butanol Value                    : >70

Industrial Degreaser Solvent emulsify and dissolves most of oily and soily materials quickly and effectively.

How to clean oily greasy messes like grease, paint, oil, lubricants, and other water-insoluble materials, your answer must be to use a suitable Degreaser.

Solvent based Industrial Degreaser manufacturer and supplier in Mumbai MIDC Maharastra, Kandla Gandhidham, Surat Gujrat Chennai - Ennore, Visakhapatnam, Kolkata Haldai, Fujairah, Dubai, Sharjah, Abudhabi, Ruwi Barka Muscat Oman

Boiler Water Treatment products

CHARACTERISTIC :

• Convenient liquid treatment, which provides the basic alkalinity on which successful water treatment depends.
• Provides optimum conditions for hardness control to function.
• Neutralizes acid conditions.
• Will assist in keeping silica in suspension.
• Simple test to determine level of treatment.
• Can be used in boilers of all pressures.
• Can be used as a neutralizer after acid cleaning operations
• Suitable for use with all auxiliary boilers; waste heat units; economizers, package boilers, smoke and water tube boilers.
• Dispersant action suspends sludge and sediment particles for efficient blow down.
• Oxygen scavenging for optimum protection.
• Protects boiler, steam lines, condensate lines and feed water lines from corrosion.
• Fast action due to catalyst.
• Simple test to determine level of treatment.

Basic Boiler System Schematic

Below is a summary of problems associated with the common impurities in water and solutions to each problem.

List Of Problems Caused By Impurities In Water

Chemical feed should be continuous. Chemical pumping rates can create problems especially for neat feed set ups. Using on/off feed systems such as a recycle timer can create problems. Chemical feed pumps should be sized or product strengths should be adjusted to allow continuous feed.

Steam and carbon dioxide leave continuously, so setting up a neutralizing amine pump to feed intermittently can lead to wide variations in condensate pH control. If sampling is done from a condensate receiver, the tank volume may buffer the variations and the changes may not be noticed, but corrosion could be occurring to areas of the piping that see the rapidly changing pH.


If polymeric dispersants, phosphonates, phosphate, or chelants are fed intermittently into the feedwater using a recycle timer, and the amines are not fed continuously, a cycle of iron slugs returning in the condensate can be followed by slugs of high dispersancy cleaning of the iron from the deaerator and dragging it into the boiler.

Load changes can affect chemical concentrations when the chemical feed is base fed. Example: Steam production of one million lbs./day; 4% blowdown; 20% active boiler polymer product fed at 5 pounds per day. The calculated daily average polymer concentration would be 24 ppm. Assume peak plant production load is 60,000 lbs./hr., but during the overnight hours the load is only 5,000 lbs./hr. If the dispersant is being fed continuously over the 24 hours, during the 8- hour low load period, the boiler polymer concentration would have increased to over 200 ppm. Upon high fire when production resumes, carryover is very possible because of over concentrating the polymeric dispersant.

Chemical feed needs to be paced to steam production, especially where significant load changes occur.

Carbon dioxide can concentrate in steam and condensate making neutralizing amine treatment impractical. Carbon dioxide levels can be relatively low in steam exiting a boiler at only a few ppm, but if there are areas where it becomes “trapped” and can accumulate, concentrations can reach extremely high levels into the hundreds or even thousands of ppm.

CO2 is a non-condensable gas. It has a distribution ratio in the steam piping and condenses at points throughout the system. At the boiling point, the solubility of the gas in water is extremely low. The solubility of the CO2 is actually lower in the condensate than it is in the steam. For the CO2 to escape from the steam into the water it will accumulate in the steam space just above the water level until the partial pressure becomes high enough for the CO2 in the incoming steam to be able to exit into the condensate. This creates a steady state condition of CO2 coming in and exiting, but an area of severe localized corrosion occurs where the carbon dioxide concentration is high.

The highest CO2 concentration normally occurs just above the condensate water level. If there is an area where condensation is occurring and running down pipes or the sides of vessels, the CO2 concentration will be very high and the pH will be about 5.3 – 5.5 in that location creating high corrosion rates.


The solubility of CO2 increases dramatically as the condensate temperature falls below 212 °F. When there is an accumulation of CO2 in an area and the condensate temperature is relatively low, the amount of carbon dioxide going into solution will be extremely high. Where low-pressure steam is used that contains CO2 and the heat exchange process has relatively close temperature differentials between the steam and the condensate, there is potential for high uptake of the CO2 into the condensate and localized low pH.

Neutralizing amines are selected in an effort to condense in the right concentrations to carbon dioxide condensation levels throughout the steam system. Neutralizing amines cannot control corrosion where this localized accumulation of carbon dioxide occurs since the high CO2 overwhelms the demand for the amine. Even point source addition of amine may not be able to satisfy the demand.

Where the concentrating effect of CO2 occurs, methods of reducing the problem include eliminating or minimizing CO2 in the steam, venting off the CO2 in the localized area, eliminating condensate in the area, applying a filming amine or metal passivator, or using higher temperature steam and increasing condensate temperature to reduce the CO2 content in the condensate.

#BoilerWaterTreatmentCHEMICAL_supplierDUBAI
#BoilerWaterTreatmentCHEMICAL_supplierMUSCAT
#BoilerWaterTreatmentCHEMICAL_supplierMUMBAI
#BoilerWaterTreatmentCHEMICAL_supplierNAIROBI

A one-step and one SHOT treatment to control the formation of rust and scale in boilers. Contains alkaline compounds, scale and corrosion inhibitors, oxygen scavengers and sludge conditioners. which resulting in a scale and corrosion control by one shot operation.

Boiler water treatment speacialized chemical products One Shot Universal Liquitreat  Exporter, manufacturer, supplier in Mumbai, Gandhidham - Kandla, Mundra, Sikka, Surat, Kolkata - Haldia, Buz Buj, Paradip, Visakhapatnam - Gangavaram, Fujairah, Dubai, Sharjah, Abu Dhabi, Ruwi Barka Muscat Sohar, Oman, Sudan, Yemen, Nairobi Kenya

BOILER WATER TREATMENT chemicals manufacturer and supplier in INDIA, MUSCAT OMAN, UAE DUBAI, Nairobi

PHYSICAL PROPERTIES ::--

APPEARANCE…..Clear Brownish Liquid
ODOR               …..Fresh
pH                     …..13.50
SPECIFICGRAVITY…..1.25
 

Other Grade of Coil Cleaner ::: 

Coil Brite Rx Yellow -  Part No.- RXSOL-16-1680-005  --- www.rxmarine.com/coil-brite

Coil Cleaner - Part No.- RXSOL-41-8672-025 --- www.rxmarine.com/Coil-Cleaner-RXSOL

Coil Cleaner ( Non Rinsing Type ) - Part No. - RXSOL-16-1697-025 ---  www.rxmarine.com/coil-cleaner-non-rinsing

Condenser Coil Cleaner  - Part No.- RXSOL-50-5015-025 --- www.rxmarine.com/Condensor-cleaner

Evaporator Coil Cleaner :::  Part No.- RXSOL-51-6004-025  --- www.rxmarine.com/evaporator-coil-cleaner

Coil Cleaner Free from ACID ::: Part No.- RXSOL-16-1082-025 --- http://rxmarine.com/Coil-Cleaner-Free-from-ACID

C-SHINE Alkaline coil cleaner ::: Part No- RXSOL-16-1668-025 --- www.rxmarine.com/C-SHINE-RXSOL-coil-cleaner

C SHINE coil cleaner specialized to remove dirt deposits, oily and greasy deposition from Condenser and Cooling coils. C-shine is specialized cleaning Chemical for Air Conditioner  cleaning and Coil Cleaning.

C-Shine contains powerful selected alkaline additives with wetting agent and surfactant which helps to penetrates and remove dirt, grease and oil accumulation on evaporators and condenser coils quickly.

WHY C-SHINE coil required to clean AC Coil?
In general  deposition of  dirt grease restricts the airflow which results cooling effect, So its cleaning becomes necessory C Shine Coil Cleaner removes harmful deposits from the coil without harming the equipment and thus increasing its life as well as cooling effect. The usage of "C-Shine" is economical as it has a low cost.

C Shine is specially formulated to clean oil and grease, So it can be use for many surrounding cleaning and maintenance.

#AlkalineCoilCleaner
#CshineCoilCleaner
#CoilCleaner_ManufacturerExporterSupplier
#CoilClean_Muscat
#CoilCleaner_Dubai

C Shine Coil Cleaner manufacturer, Exporter and supplier in INDIA - Mumbai, Navi Mumbai MIDC, Rabale, Pawane, Koparkhairna MIDC, Taloja, Pune, Nashik, Surat, Hazira, Kandla, Gandhidham, Mundra, Jamnagar, Sikka, Gujrat GIDC, Kolkata, Howrah West Bengal, Durgapur, Paradip Odisha, Tata, Ranchi, Dhanbad, Patna, Varanashi, Mudra, Goa, Chennai - Ennore, Visakhapatnam Andhra

C-Shine Coil Cleaner Supplier in Muscat Barka, Oman, Al Qusais, Deira, Saif Zone, Fujairah, Sharjah, Dubai, Abudhabi, Ajman, Diera, UAE Middle East, Al Quoz, Jebel Ali, Umm Al Quawain, Ras Al Khaimah, Masafi, Khor Fakkan, Al Hayl, Al Ain, Ras Al Khor Industrial Area, Al khubaisi,  Um Ramool Industrial Area, Al Qusais Industrial Area,  Jebel Ali

COA

Chemical Properties

Sulfolane supplier in Mumbai, Kandla, Chennai, Ennore, Visakhapatnam, Kolkata, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abudhabi, Ajman, Muscat Barka Oman

We also keeping ready stock of following chemicals : 

1. Hydrazine Hydrate 

2. Monoethanolamine 

3. Diethanolamine 

4. Sulfolane 

5. Morpholine 

6. Potassium carbonate 

7. Triethanolamine 

8. Cyclohexylamine 

9. Ethylene Diamine 

10. Trichloroethylene